Ünvan:
Doçent
Oda / Ofis:
M4255
Tel. No:
+90 212 359 4471
Faks No:
+90 212 287 2456
can.aydiner@bogazici.edu.tr
Eğitim:
- Ph.D. 2004. Applied Mechanics, California Institute of Technology, Pasadena, California, ABD
- M.S. 1999. Applied Mechanics, California Institute of Technology, Pasadena, California, ABD
- B.S. 1998. Makina Mühendisliği, ODTÜ, Ankara, Türkiye
Deneyim:
- Doçent Doktor, Makina Mühendisliği, 2015-
- Ziyaretçi Öğretim Üyesi, Makina ve İnşaat Mühendisliği, California Institute of Technology, 2018-2019
- Yardımcı Doçent Doktor, Makina Mühendisliği, 2008-2015
- Araştırma Üyesi, Los Alamos National Laboratory, Los Alamos, NM 2005-2008
- Araştırma Üyesi, Iowa State University / DOE Ames Laboratory, Ames, IA 2004-2005
- Araştırma Görevlisi, California Institute of Technology, California, 1998-2004
Okuttuğu Dersler:
- ME 241 Statics
- ME 345 Mechanics of Materials
- ME 446 Applied Solid Mechanics
- ME 447 Sürekli Ortamlar Mekaniğine Giriş
- ME 613 Deformation of Engineering Materials
- ME 618 Mechanical Behavior of Materials
- ME 502 İleri Mühendislik Matematiği II
- AUTO 542 Sonlu Elemanlar Yöntemi
- AUTO 543 Yorulma ve Kırılma
Araştırma Konuları:
- Deneysel mekanik
- Mikro ölçekte mekanik
- Kristal akma teorileri
- Tam saha gerinim ölçümleri
- Yük altında mikroskopik ölçüm
- Yüksek özgül dayanımlı metaller
- Artık gerilmeler
- Metal camlar
- Kırınımla gerinim ölçümü
Ödüller & Onur Belgeleri:
- Fulbright Akademik Araştırma Bursu, 2018
- “Director’s postdoctoral fellowship”, Los Alamos National Laboratory, 2005-2008
- Harold Hellwig Fellowship in Structural Engineering, Caltech, 1998-1999
- Hacı Ömer Sabancı Bursu , ODTÜ, Ankara, Türkiye, 1994-1998
Yayınlar:
- Türkoğlu, O., Aydıner, C. An Exploration of Grain-Averaged Stress Measurement Using Partial Unloads with In situ Microscopic Image Correlation. Exp Mech 64, 655–674 (2024). https://doi.org/10.1007/s11340-024-01050-4
- S.C. Erman, L. Stainier, C.C. Aydıner, “Guiding severely anisotropic twinning bands in Magnesium: An in situ investigation by full-field microscopic image correlation”, Materials Today Communications, 35 (2023) 106203. https://doi.org/10.1016/j.mtcomm.2023.106203.
- E. Kapan, S. Alkan, C.C. Aydıner, J. K Mason, “Energetic contributions to deformation twinning in magnesium”, Modeling and Simulation in Materials Science and Engineering, 31 (2023) 075002. https://doi.org/10.1088/1361-651X/acec8c.
- O. Türkoğlu, C. C. Aydıner, SEM Annual Conference and Exposition on Experimental and Applied Mechanics, in “Conference Proceedings of the Society for Experimental Mechanics Series”, “Enabling Digital Image Correlation with High-Resolution Microscopic Optics via Working Distance Automation: Advancing Resolution and Accuracy Limits”, 49-56 pp., Pittsburgh PA, USA, June 2022. https://doi.org/10.1007/978-3-031-17471-1_9.
- S.C. Erman, C. C. Aydıner, SEM Annual Conference and Exposition on Experimental and Applied Mechanics, in “Conference Proceedings of the Society for Experimental Mechanics Series”, “Coordinated Twinning Bands in Magnesium at the Existence of Stress Raisers via In Situ Microscopic Image Correlation”, 63-69 pp., Pittsburgh PA, USA, June 2022. https://doi.org/10.1007/978-3-031-17471-1_11.
- N. A. Özdür, İ. B. Üçel, J. Yang, C. C. Aydıner, “Residual Intensity as a Morphological Identifier of Twinning Fields in Microscopic Image Correlation”, Experimental Mechanics, 61, 499-514 (2021). https://doi.org/10.1007/s11340-020-00672-8
- N.A. Özdür, C. C. Aydıner, SEM Annual Conference and Exposition on Experimental and Applied Mechanics, in “Conference Proceedings of the Society for Experimental Mechanics Series”, “Advance of Collaborative Twinning Fields in Magnesium AZ31 via the Strain and Residual Intensity Channels in Microscopic Image Correlation”, 1-9 pp., virtual, June 2021. https://doi.org/10.1007/978-3-030-86737-9_1.
- Özdür, N.A., Üçel, İ.B., Yang, J., Aydıner, C.C: "Residual Intensity as a Morphological Identifier of Twinning Fields in Microscopic Image Correlation", Experimental Mechanics, in press., doi:10.1007/s11340-020-00672-8, 2020
- Shafaghi, N., Kapan, E. & Aydıner, C.C., "Cyclic Strain Heterogeneity and Damage Formation in Rolled Magnesium Via In Situ Microscopic Image Correlation", Experimental Mechanics, 60: 735–751, 2020
- Üçel İB, Kapan E, Türkoğlu O, Aydıner CC., "In situ investigation of strain heterogeneity and microstructural shear bands in rolled Magnesium AZ31", International Journal of Plasticity, 118:233-51, 2019
- Enver Kapan, Nima Shafaghi, Sevinc̣ Uc̣ar, C. Can Aydıner, “Texture-dependent character of strain heterogeneity in Magnesium AZ31 under reversed loading”, Materials Science and Engineering: A, vol. 684, pp. 706–711, 2017. (doi: 10.1016/j.msea.2016.12.085)
- B. Haghouyan, N. Shafaghi, C. C. Aydıner, G. Anlaş, “Experimental and computational investigation of the effect of phase transformation on fracture parameters of SMA”, Smart Material and Structures, vol. 25, 075010, 2016. (doi:10.1088/0964-1726/25/7/075010)
- C. C. Aydıner, M. Ayça Telemez, “Multiscale deformation heterogeneity in twinning magnesium investigated with in situ image correlation”, International Journal of Plasticity, vol. 56, pp. 203-218, 2014. (doi: 10.1016/j.ijplas.2013.12.001)
- C. C. Aydıner, M. B. Prime, “Three-Dimensional Constraint Effects on the Slitting Method for Measuring Residual Stress,” Journal of Engineering Materials and Technology-Transactions of the ASME, 135, 031006 (2013), doi: 10.1115/1.4023849.
- C. C. Aydıner, J. V. Bernier, B. Clausen, U. Lienert, C. N. Tome, and D. W. Brown, “Evolution of stress in individual grains and twins in a magnesium alloy aggregate,” Physical Review B, 80, 024113 (2009).
- C. C. Aydıner, D. W. Brown, N. A. Mara, J. Almer, and A. Misra, “In situ x-ray investigation of freestanding nanoscale Cu-Nb multilayers under tensile load,” Applied Physics Letters, 94, 031906 (2009).
- C. C. Aydıner, D. W. Brown, A. Misra, Y.-C. Wang, J. J. Wall, N. A. Mara, and J. Almer, “Residual strain and texture in free-standing nanoscale Cu-Nb multilayers”, Journal of Applied Physics, 102[8], 083514 (2007).
- C. C. Aydıner and E. Üstündag, “Residual Stresses in a Bulk Metallic Glass Cylinder Induced by Thermal Tempering,”, Mechanics of Materials, 37, 201-212 (2005).
- C. C. Aydıner, B. Clausen, E. Üstündag, J. C. Hanan, M. A. M. Bourke and R. A. Winholtz, “Residual Stresses in a Bulk Metallic Glass Stainless Steel Composite,” Materials Science and Engineering A, 399, 107-113 (2005).
- S. Y. Lee, B. Clausen, E. Üstündag, H. Choi-Yim, C. C. Aydıner and M. A. M. Bourke, “Compressive Behavior of Wire Reinforced Bulk Metallic Glass Matrix Composites,” Materials Science and Engineering A, 399,128-133 (2005).