Publications

2016 Papers (SCIE)

  • Hazar, Selcuk; Anlas, Gunay; Moumni Ziad  "Evaluation of transformation region around crack tip in shape memory alloys." International Journal of Fracture, VL 197, IS 1, pp.99-110, JAN 2016.
  • Oktav, Akin; Anlas, Gunay; Yilmaz, Cetin "Assessment of vehicle noise variability through structural transfer path analysis." International Journal of Vehicle Design, VL 71, IS 1-4, pp.300-320, 2016.
  • Haghgouyan, Behrouz; Shafaghi, Nima; Aydiner, C. Can; Anlas, Gunay "Experimental and computational investigation of the effect of phase transformation on fracture parameters of an SMA." Smart Materials and Structures, VL 25, IS 7, JUL 2016.
  • S. Aidin; L. P. Yousefi; E. Balikci, "Growing Single Crystals with a Low Melt Height and an Axial Vibration", Crystal Growth & Design. Vol. 16, issue:4, pp. 2429-2440, APR 2016  
  • M. Montakhab; M. Bacak; E. Balikci, “Low Melt Height Solidification of Superalloys", etallurgical and Materials Transactions, vol. 47A, issue:6, pp. 3031-3039, JUN 2016
  • B. M.Selcen, H. Bedir, and A. E. Aksoylu, "Steady state performance analysis of OSR and serial OSR-WGS reactors", Fuel Processing Technology, Volume 152, pp. 240-249, NOV 2016
  •  Jahanbakhsh S., Satir M., Celik M.,"Study of electron current extraction from a radio frequency plasma cathode designed as a neutralizer for ion source applications", Rev Sci Instrum, vol 87(2), Feb 2016.
  • Umud Esat Ozturk, Lutfi Ucar, Kaveh Shahidi, Nuri Ersoy, Onur Zobi, Umit Bagdat, Rıfat Yanarocak, and Serkan Elmali, "Custom Design Multi-Axial Engine Mount Load-Cell Development for Road Load Identification and Fatigue Life Estimation", SAE International Journal of Materials and Manufacturing, vol. 9 (3), pp. 642-648, AUG 2016 
  • Kenan Çınar and Nuri Ersoy, "3D finite element model for predicting manufacturing distortions of composite parts", Journal of Composite Materials, vol. 50 (27), pp. 3791-3807, NOV 2016
  • Murat Koc, Fazil O. Sonmez, Nuri Ersoy, and Kenan Cinar, "Failure behavior of composite laminates under four-point bending", Journal of Composite Materials, vol. 50 (26), pp. 3679-3697, NOV 2016
  • Akıner T., Mason J. K., Ertürk H., 2016, "A new interlayer potential for hexagonal boron nitride", Journal of Physics: Condensed Matter, vol. 28, no. 38.
  • İlhan B., Kurt M., Ertürk H., 2016, "Experimental investigation of heat transfer enhancement and viscosity change of hBN nanofluids", Experimental Thermal and Fluid Science, vol. 77, pp. 272-283.
  • Heshmati F, Erturk H, 2016, “Single Phase Models for Improved Estimation of Friction Factor for Laminar Nanofluid Flow in Pipes”, International Journal of Heat and Mass Transfer, vol.95C, pp. 416-425.
  • Talebi Moghaddan S, Erturk H, Menguc MP, 2016, “Enhancing Local Absorption Patterns within Gold Nano-Structures on a Dielectric Surface under an AFM Probe and with Evanescent-Wave Illumination”, Journal of Quantitative Spectroscopy and Radiative Transfer, vol.178, pp.124-133.
  • Tunc, B.; Ozupek, S., "Implementation and validation of a three dimensional damaging finite strain viscoelastic model", International Journal of Solids and Structures, vol. 102, pp. 275-285 DEC 2016.
  • Murat Ozturk, Sinem Kocaoglan, and Fazil O. Sonmez, "Concurrent design and process optimization of forging", Computers & Structures, vol. 167, pp. 24-36, APR 2016 

2015 Papers (SCIE)

  • Hazar, Selcuk; Zaki, Wael; Moumni, Ziad; Anlas, Gunay; Modeling Of Steady-State Crack Growth İn Shape Memory Alloys Using A Stationary Method Source: International Journal Of Plasticity  Volume: 67   Pages: 26-38  Published: APR 2015
  • Zharikov, E. V.; Sukhanova, E. A.; Belov, S. D.; Golyshev, V. D.; Balikci, E.; Avetissov, I. Ch.; Combined method of axial low-frequency vibrations and axial heat flux for crystal growth from a melt, DOKLADY PHYSICS  Volume: 60   Issue: 3   Pages: 118-121   Published: MAR 2015
  • H. I. Basturk and M. Krstic, “Adaptive sinusoidal disturbance cancellation for unknown LTI systems despite input delay,” Source: Automatica Volume: 58   Pages: 131-138
  • Basturk, Halil I.; Rosenthal, Ben; Krstic, Miroslav, Pitch Control Design for Tandem Lifting Body Catamaran by Aft Lifting Body Actuation, IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY   Volume: 23   Issue: 2   Pages: 700-707   Published: MAR 2015
  • Turkoz, Emre; Celik, Murat; AETHER: A simulation platform for inductively coupled plasma JOURNAL OF COMPUTATIONAL PHYSICS   Volume: 286   Pages: 87-102   Published: APR 1 2015
  • Turk, Ugur; Turan, Erhan; Orhan, Mehmet; Ecder, Ali; An Adaptive Time-Stepping Strategy For The Implicit Solution Of Steady Transonic Flow  Progress In Computational Fluid Dynamics   Volume: 15   Issue: 3   Pages: 135-143
  • Cinar, Kenan; Ersoy, Nuri, Effect of fibre wrinkling to the spring-in behaviour of L-shaped composite materials, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING   Volume: 69   Pages: 105-114   Published: FEB 2015
  • Mason, J. K.; Lind, J.; Li, S. F.; Reed, B. W.; Kumar, M.; Kinetics and anisotropy of the Monte Carlo model of grain growth, ACTA MATERIALIA   Volume: 82   Pages: 155-166   Published: JAN 1 2015
  • Mason, J. K.; Grain boundary energy and curvature in Monte Carlo and cellular automata simulations of grain boundary motion, ACTA MATERIALIA   Volume: 94   Pages: 162-171   Published: AUG 1 2015
  • Mason, Jeremy K.; Lazar, Emanuel A.; MacPherson, Robert D.; Srolovitz, David J.; Geometric and topological properties of the canonical grain-growth microstructure, PHYSICAL REVIEW E   Volume: 92   Issue: 6     Article Number: 063308   Published: DEC 22 2015
  • Tanlak, Niyazi; Sonmez, Fazil O.; Senaltun, Mahmut, Shape optimization of bumper beams under high-velocity impact loads, ENGINEERING STRUCTURES   Volume: 95   Pages: 49-60   Published: JUL 15 2015
  • Balta, Berna; Sonmez, Fazil O.; Cengiz, Abdulkadir, Experimental identification of the torque losses in V-ribbed belt drives using the response surface method, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING   Volume: 229   Issue: 8   Pages: 1070-1082   Published: JUL 2015
  • Balta, Berna; Sonmez, Fazil O.; Cengiz, Abdulkadir, Speed losses in V-ribbed belt drives, MECHANISM AND MACHINE THEORY   Volume: 86   Pages: 1-14   Published: APR 2015
  • Yuksel, Osman; Yilmaz, Cetin; Shape optimization of phononic band gap structures incorporating inertial amplification mechanisms, JOURNAL OF SOUND AND VIBRATION   Volume: 355   Pages: 232-245   Published: OCT 27 2015
  • Taniker, S.; Yilmaz, C.; Design, analysis and experimental investigation of three-dimensional structures with inertial amplification induced vibration stop bands, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES   Volume: 72   Pages: 88-97   Published: OCT 15 2015

 
2014 Papers (SCIE)
 

  • Tuncer, Aydin; Anlas, Gunay; Yilmaz, Yasin An investigation of the effect of weatherstrip seals on vehicle vibration and acoustics using an alternative modeling technique. Source: Journal of Vibration and Acoustics-Transactions of the ASME  Volume: 136   Issue: 4 Article Number: 041018   Published: Aug 2014 
  • Goktepe, Sinan; Atalik, Kunt; Erturk, Hakan Comparison of single and two-phase models for nanofluid convection at the entrance of a uniformly heated tube. Source: International Journal of Thermal Sciences  Volume: 80   Pages: 83-92  Published: JUN 2014 
  • Aydiner, C. Can; Telemez, M. Ayca Multiscale deformation heterogeneity in twinning magnesium investigated with in situ image correlation. Source: International Journal of Plasticity  Volume: 56   Pages: 203-218   Published: MAY 2014 
  • Altincekic, Arun; Balikci, Ercan Precipitate Rafting in a Polycrystalline Superalloy During Compression Creep. Source: Metallurgical and Materials Transactions A-Physical Metallurgy And Materials Science  Volume: 45A   Issue: 13   Pages: 5923-5936   Published: DEC 2014
  • Basturk, Halil I.; Krstic, Miroslav State derivative feedback for adaptive cancellation of unmatched disturbances in unknown strict-feedback LTI systems. Source: Automatica  Volume: 50   Issue: 10   Pages: 2539-2545   Published: OCT 2014
  • Turkoz, Emre; Celik, Murat 2-D Electromagnetic and fluid models for inductively coupled plasma for rf ion thruster performance evaluation. Source: IEEE Transactıons on Plasma Science  Volume: 42  Issue: 1 Pages: 235-240 Published: JAN 2014
  • Korkmaz, O.; Celik, M. Global numerical model for the assessment of the effect of geometry and operation conditions on insert and orifice region plasmas of a thermionic hollow cathode electron source. Source: Contributions to Plasma Physics  Volume: 54   Issue: 10   Pages: 838-850  Published: NOV 2014
  • Cinar, Kenan; Ozturk, Umud Esat; Ersoy, Nuri; et al. Modelling manufacturing deformations in corner sections made of composite materials. Source: Journal of Composite Materials  Volume: 48   Issue: 7   Pages: 799-813   Published: MAR 2014 
  • Tursun, Murat; Eskinat, Esref H2 optimization of damped-vibration absorbers for suppressing vibrations in beams with constrained minimization. Source: Journal of Vibration and Acoustics-Transactions of the ASME  Volume: 136   Issue: 2     Article Number: 021012   Published: APR 2014 
  • Li, S. F.; Mason, J. K.; Lind, J.; et al. Quadruple nodes and grain boundary connectivity in three dimensions. Source: Acta Materialia  Volume: 64   Pages: 220-230   Published: FEB 2014
  • Tanlak, Niyazi; Sonmez, Fazil O. Optimal shape design of thin-walled tubes under high-velocity axial ımpact loads. Source: Thin-Walled Structures  Volume: 84   Pages: 302-312   Published: Nov 2014 
  • Ertas, Ahmet H.; Sonmez, Fazil O. Design optimization of fiber-reinforced laminates for maximum fatigue life. Source: Journal of Composite Materials  Volume: 48   Issue: 20   Pages: 2493-2503 Published: Aug 2014 
  • Yuksel, Osman; Yilmaz, Cetin, Active noise control in a duct with flow. Source: Journal of Dynamic Systems Measurement and Control-Transactions of the ASME  Volume:136   Issue: 3     Article Number: 031014   Published: MAY 2014

 
2013 Papers (SCIE)
 

  • Altintas, S; Mahmutyazicioglu, Nazim; Albayrak, Onder; Ipekoglu, Mehmet; Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams Source: Journal Of Materials Research Volume: 28   Issue: 17   Pages: 2509-2519   Published: SEP 2013
  • Aydiner, C. Can; Prime, Michael B. Three-Dimensional Constraint Effects on the Slitting Method for Measuring Residual Stress. Source: Journal Of Engıneerıng Materıals And Technology-Transactıons Of The Asme  Volume: 135   Issue: 3     Article Number: 031006   Published: JUL 2013 
  • Altincekic, Arun; Balikci, E. Precipitate Size in the Superalloy IN738LC During Compression Creep. Source: Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science  Volume: 44A   Issue: 6   Pages: 2487-2498   Published: JUN 2013
  • Balikci, Ercan; Dario, Aidin; Sicim, Hasan Ozgen; Single crystal growth of germanium - silicon alloys. Source: Journal Of Optoelectronics And Advanced Materials Volume: 15 Issue: 1-2   Pages: 25-30   Published: JAN-FEB 2013
  • Danis, M. E.; Orhan, M.; Ecder, A. 2. ISPH modelling of transient natural convection. Source: International Journal Of Computational Fluid Dynamics  Volume: 27   Issue: 1   Pages: 15-31   Published: JAN 1 2013 
  • Scherer, Carsten W.; Kose, I. Emre From transfer matrices to realizations: Convergence properties and parametrization of robustness analysis conditions. Source: Systems & Control Letters  Volume: 62   Issue: 8   Pages: 632-642   Published: AUG 2013
  • Lazar, Emanuel A.; Mason, Jeremy K.; MacPherson, Robert D.; Statistical topology of three-dimensional Poisson-Voronoi cells and cell boundary networks. Source: Physical Review E  Volume: 88   Issue: 6 Article Number: 063309. Published: DEC 20 2013
  • Mason, Jeremy K.; Johnson, Oliver K. Convergence of the hyperspherical harmonic expansion for crystallographic texture. Source: Journal Of Applied Crystallography Volume: 46   Pages:1722-1728   Part: 6. Published: DEC 2013
  • Mason, Jeremy K.; Johnson, Oliver K.; Reed, Bryan W.; et al. Statistics of twin-related domains and the grain boundary network. Source: Acta Materialia Volume: 61   Issue: 17   Pages: 6524-6532   Published: OCT 2013
  • Acar, M. A.; Yilmaz, C. Design of an adaptive-passive dynamic vibration absorber composed of a string-mass system equipped with negative stiffness tension adjusting mechanism. Source: Journal of Sound and Vibration  Volume: 332   Issue:2   Pages: 231-245   Published: JAN 21 2013
  • Taniker, S.; Yilmaz, C. Phononic gaps induced by inertial amplification in BCC and FCC lattices. Source: Physics Letters A  Volume: 377   Issue: 31-33   Pages: 1930-1936   Published: OCT 30 2013
  • Acar, G.; Yilmaz, C. Experimental and numerical evidence for the existence of wide and deep phononic gaps induced by inertial amplification in two-dimensional solid structures. Source: Journal of Sound and Vibration  Volume: 332   Issue: 24   Pages: 6389-6404   Published: NOV 25 2013

 
 
2012 Papers (SCIE)
 

  • A.Oral, G. Anlas, J. Lambros, Determination of Gurson-Tvergaard-Needleman Model Parameters for Failure of a Polymeric Material Source: Internatıonal Journal Of Damage Mechanics Volume: 21 Issue: 1 Pages: 3-25 DOI: 10.1177/1056789510385261 Published: JAN 2012
  • E. Hasret, M. Ipekoglu, S. Altintas, Microwave-assisted synthesis of hydroxyapatite for the removal of lead(II) from aqueous solutions Source: Environmental Science And Pollution Research Volume: 19 Issue:7 Pages: 2766-2775 DOI: 10.1007/s11356-012-0776-5 Published: AUG 2012
  • R. Kayikci, F. O. Sonmez, Design of composite laminates for optimum frequency response Source: Journal Of Sound And Vibration Volume: 331 Issue: 8 Pages: 1759-1776 DOI: 10.1016/j.jsv.2011.12.020 Published: APR 9 2012
  • A.Dario, H. O. Sicim, E. Balikci, A comparative study on the growth of germanium-silicon single crystals grown by the vertical Bridgman and axial heat processing techniques Source: Journal Of Crystal Growth Volume: 351 Issue: 1 Pages: 1-8 DOI:10.1016/j.jcrysgro.2012.04.008 Published: JUL 15 2012
  • S. Ozupek, U. C. Unlu Viscoelastic analysis of a dental metal-ceramic system Source: Mechanics Of Time-Dependent Materials Volume: 16 Issue: 4 Pages: 427-437 DOI: 10.1007/s11043-012-9170-4 Published: NOV 2012
  • H. Mercan, K. Atalik, Isothermal and non-isothermal viscoelastic flow of PTT fluid in lid-driven polar cavity Source: Korea-Australia Rheology Journal Volume: 24 Issue: 4 Pages: 277-286 DOI: 10.1007/s13367-012-0034-x Published: DEC 2012
  • E. Samur, L. Flaction, H. Bleuler Design And Evaluation Of A Novel Haptic Interface For Endoscopic Simulation Source: Ieee Transactions On Haptics Volume: 5 Issue: 4 Pages: 301-311 Doı: 10.1109/Toh.2011.70 Published: Oct-Dec 2012
  • L. Santos-Carreras, K. Leuenberger, E. Samur, Tactile Feedback Improves Performance in a Palpation Task: Results in a VR-Based Testbed Source: Presence-Teleoperators And Virtual Environments Volume: 21 Issue: 4 Pages: 435-451 Published: FALL 2012
  • Scherer, Carsten W.; Kose, I. Emre Gain-Scheduled Control Synthesis Using Dynamic D-Scales Source: Ieee Transactıons On Automatıc Control Volume: 57 Issue: 9 Pages: 2219-2234 Doı: 10.1109/Tac.2012.2184609 Published: Sep 2012
  • Veenman, Joost; Scherer, Carsten W.; Kose, I. Emre Robust Estimation With Partial Gain-Scheduling Through Convex Optimization Source: Control Of Lınear Parameter Varyıng Systems Wıth Applıcatıons Pages: 253-278 Doı: 10.1007/978-1-4614-1833-7_10 Published: 2012

 
2011 Papers (SCIE)
 

  • U.E. Ozturk; G. Anlaş, Hydrostatic compression of anisotropic low density polymeric foams under multiple loadings and unloadings, Polymer Testing, vol. 30, issue: 7, pp. 737-742, 2011
  • V. Alkan; S.M. Karamihas; G. Anlaş., Finite element modeling of static tire enveloping characteristics, International Journal of Automotive Technology, vol. 12, issue 4, pp. 529-535, 2011
  • U.E. Ozturk; G. Anlaş, Finite element analysis of expanded polystyrene foam under multiple compressive loading and unloading, Materials & Design, vol. 32, issue: 2, pp. 773-780, 2011
  • S.C. Baslamisli, I.E. Kose, G. Anlaş, Handling stability improvement through robust active front steering and active differential control, Vehicle System Dynamics, vol.49, issue:5, pp. 657-683, 2011
  • K. Atalik; U. Sonmezler, Heat transfer enhancement for boundary layer flow over a wedge by the use of electric fields, Applied Mathematical Modeling, vol. 35, issue. 9 pp. 4516-4525, 2011
  • H. Mercan; K. Atalik, Flow structure for Power-Law fluids in lid-driven arc-shape cavities, Korea-Australia Rheology Journal, vol. 23, issue:2, pp. 71-80, 2011
  • E. Turan; A. Ecder, Analysis of a bimetallic slab in non-isothermal flow, Proceedings of the Institution of Mechanical Engineers Part C – Journal of Mechanical Engineering Science, vol. 255, issue: C3, pp. 658-672, 2011
  • A. Dario, H.O. Sicim, E. Balikci , A new approach for dopant distribution and morphological stability in crystals grown by the axial heat processing (AHP) technique, Journal of Crystal Growth, vol.337, issue:1, pp. 65-71, 2011
  • E. Balikci; O. Yaman, Investigation on liquid bath nitriding of selected steels, Surface Engineering, vol.27, issue:8, pp. 609-615, 2011
  • A. Dario, H.O. Sicim, E. Balikci, Germanium-silicon single crystal growth by the axial heat processing (AHP) technique, Journal of Crystal Growth, vol. 318, issue:1, pp. 1057-1061, 2011
  • M. Çelik, Spectral measurements of inductively coupled and helicon discharge modes of a laboratory argon plasma source, Spectrochimica Acta Part B – Atomic Spectroscopy, vol. 66, issue:2, pp.149-155, 2011
  • H. Ertürk, Evaluation of image reconstruction algorithms for non-destructive characterization of thermal interfaces, International Journal of Thermal Sciences, vol. 50, issue:6, pp. 906-917, 2011
  • H.C. Yıldırım, Ş. Özüpek, Structural assessment of a solid propellant rocket motor: Effects of aging and damage, Aerospace Science and Technology, vol. 15, issue:8, pp. 635-641, 2011
  • Akbulut M. ve F.Ö. Sönmez, Design optimization of laminated composites using a new variant of simulated annealing, Computers and Structures, Eylül 2011, 89: 1712–1724.
  • Tanlak N., F.Ö. Sönmez ve E. Talay, Detailed and simplified models of bolted joints under impact loading, The Journal of Strain Analysis for Engineering Design, Nisan 2011, 46: 1-13.
  • Ertaş A.H. ve F.Ö. Sönmez, Design optimization of spot-welded plates for maximum fatigue life, Finite Elements in Analysis and Design, Nisan 2011(a), 47(4): 413-423.
  • Ertaş A.H. ve F.Ö. Sönmez, Design optimization of composite structures for maximum strength using direct simulated annealing, Proc. IMechE, Part C: Journal of Mechanical Engineering Science, Ocak 2011(b), 225(1): 28-39.

2010 Papers (SCIE)

  • Ipekoglu, M., Altintas, S., “Silver Substituted Nanosized Calcium Deficient Hydroxyapatite”, Materials Technology, Volume: 25, Issue: 5, Pages: 295-301, 2010.
  • Albayrak, O., Altintas, S., “Production of ‘Tricalcium Phosphate/Titanium Dioxide’ Coating Surface on Titanium Substrates”, Journal of Materials Science & Technology, Volume: 6, Issue: 11, Pages: 1006-1010, 2010.
  • Alaca, B.E., Ozcan, C. and Anlas, G ., “Deterministic assembly of channeling cracks as a tool for nanofabrication”, Nanotechnology, Vol. 21, No. 5, Art. No. 055301, 2010.
  • Kaptan Y; Ecder A; Atalik K, Rotating-surface-driven non-newtonian flow in a cylindrical enclosure, korea-australia rheology journal volume: 22 issue: 4 pages: 265-272 published: dec 2010.
  • Balikci E. and D. Erdeniz: “Multimodal Precipitation in the Superalloy IN738LC”, Metallurgical and Materials Transactions A, volume 41A, June 2010, pp. 1391-1398.
  • Celik, M., Batishchev O. and Martinez-Sanchez M., “Use of emission spectroscopy for real-time assessment of relative wall erosion rate of BHT-200 hall thruster for various regimes of operation”, Vacuum, Vol. 84, No. 9, pp.1085-1091, 2010.
  • Kaptan Y., Ecder A. and Atalik K. "Rotating-Surface-Driven Non-Newtonian Flow in a Cylindrical Enclosure", Korea-Australia Rheology Journal, 22(4), 265-272 (2010).
  • Turan E., Basol A. M., Saygin H. and Ecder A. "Resolving Non-Symmetry in Flows via Subdomain Shifts ", Mathematical Modelling and Analysis, 15(3) :349-370 (2010).
  • Ersoy N; Garstka Tomasz; Potter Kevin; et al. ’Development of the properties of a carbon fibre reinforced thermosetting composite through cure’ Composites Part A-Applied Science And Manufacturing Volume: 41 Issue: 3 Pages: 401-409 DOI: 10.1016/j.compositesa.2009.11.007 Published: MAR 2010
  • Ersoy N; Garstka Tomasz; Potter Kevin; et al. ‘Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite’ Composites Part A-Applied Science And Manufacturing Volume: 41 Issue: 3 Pages: 410-418 DOI: 10.1016/j.compositesa.2009.11.008 Published: MAR 2010
  • Ersoy N; Tugutlu Mehmet ‘Cure Kinetics Modeling and Cure Shrinkage Behavior of a Thermosetting Composite’ Polymer Engineering And Science Volume: 50 Issue: 1 Pages: 84-92 DOI: 10.1002/pen.21514 Published: JAN 2010
  • Erturk, H. and Howell, J. R., 2010, “Efficient Signal Transport Model for Remote Thermometry in Full Scale Systems”, IEEE Transactions on Semiconductor Manufacturing, vol.23, no.1., pp.132-140. (SCI)
  • Özüpek, Ş., "Computational Procedure for the Life Assessment of Solid Rocket Motors", Journal of Spacecraft and Rockets, Vol.47, pp.639-648, 2010. doi: 10.2514/1.46801
  • Yilmaz Ç., G. M. Hulbert, “Theory of phononic gaps induced by inertial amplification in finite structures”, Physics Letters A, vol. 374, no. 34, pp. 3576–3584, 2010.

2009 Papers (SCIE)

  • Alkan, V., Karamihas, S. M. and Anlas, G., “Experimental Analysis of Tyre Enveloping Characteristics at Low Speed”, Vehicle System Dynamics, Vol. 47, No. 5, pp. 575-587, 2009.
  • Ozturk, U. E. and Anlas, G., “Energy Absorption Calculations in Multiple Compressive Loading of Polymeric Foams”, Materials & Design, Vol. 30, No. 1, pp. 15-22, 2009.
  • Yasin, Y. and Anlas, G., “An Investigation of the Effect of Counterweight Configuration on Main Bearing Load and Crankshaft Bending Stress”, Advances in Engineering Softwares, Vol. 40, No. 2, pp. 95-104, 2009.
  • Baslamisli, S. C., Kose, I. E. and Anlas, G., “Gain-scheduled Integrated Active Steering and Differential Control for Vehicle Handling Improvement”, Vehicle System Dynamics, Vol. 47, No. 1, pp. 99-119, 2009.
  • İ. E. Köse and C. W. Scherer, “Robust L2-Gain Feedforward Control of Uncertain Systems using Dynamic IQCs”, International Journal of Robust and Nonlinear Control, Vol. 19, pp. 1224-1247, 2009.
  • Gürsev Pirge, Abdurrahman Hacioğlu, Murat Ermiş, Sabri Altintaş, Determination of the Compositions of NiMnGa Magnetic Shape Memory Alloys Using Hybrid Evolutionary Algorithms, Computational Materials Science, 45, 1, 189-193, March 2009, SCI.
  • Tolga Y. Sunay, Mümin Şahin, Sabri Altintaş, The Effects Of Casting And Forging Processes On Joint Properties In Friction-Welded AISI 1050 and AISI 304 Steels, International Journal of Advanced Manufacturing Technology, 44, 1-2, 68-79, September 2009, SCI-E.
  • Sönmez F.Ö., “Optimal shape design of shoulder fillets for flat and round bars under various loadings,” Proc. IMechE, Part C: Journal of Mechanical Engineering Science, Eylül 2009, 223(C8): 1741-1754, SCI.
  • Ertaş A.H. ve F.Ö. Sönmez, “Optimization of spot-weld joints,” Proc. IMechE, Part C: Journal of Mechanical Engineering Science, Mart 2009, 223(C3): 545-555, SCI.
  • Tümer H. ve F.Ö. Sönmez, “Optimum shape design of die and preform for improved hardness distribution in cold forged parts,” Journal of Materials Processing Technology, Şubat 2009, 209(3):1538-1549, SCIE.
  • Ertaş A.H., Ö. Vardar, F.Ö. Sönmez ve Z. Solim, “Measurement and assessment of fatigue life of spot-weld joints,” Transactions of ASME; Journal of Engineering Materials and Technology, Ocak 2009, 131(1):011011, SCI.
  • Kaptan Y., Ecder A. and Atalık K. "Computational Parametric Analysis of Rotating Surface Flow", IMechE Part C: J. Mechanical Engineering Science, 223, 889-899 (2009). SCI
  • H. Mercan, K. Atalık, Vortex formation in lid-driven arc-shape cavity flows at high Reynolds numbers, European Journal of Mechanics B-Fluids, 28, 1, 61-71, 2009. SCI.
  • K. Atalık, Ü. Sönmezler, Symmetry groups and similarity analysis for boundary layer control over a wedge using electric forces, Int. J. of Nonlinear Mechanics, 44, 883-890, 2009. SCI.
  • C. C. Aydıner, J. V. Bernier, B. Clausen, U. Lienert, C. N. Tome, and D. W. Brown, “Evolution of stress in individual grains and twins in a magnesium alloy aggregate,” Physical Review B, 80(2) , 024113 2009. SCI
  • C. C. Aydıner, D. W. Brown, N. A. Mara, J. Almer, and A. Misra, “In situ x-ray investigation of freestanding nanoscale Cu-Nb multilayers under tensile load,” Applied Physics Letters, 94(3), 031906 2009. SCI
  • Dinc Erdeniz, Ercan Balikci: “Precipitate Formation and Evolution in the Superalloy IN738LC” Rare Metal Materials and Engineering, volume 38, suppl. 3, December 2009, pp. 142-146. SCIE

2008 Papers (SCIE)

  • Oral A, Lambros j, Anlas G, “Crack initiation in functionally graded materials under mixed mode loading: Experiments and simulations, JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME Volume: 75 Issue: 5 Article Number: 051110 Published: SEP 2008 (SCI)
  • C. W. Scherer and İ. E. Köse, “Robustness with dynamic IQCs: An exact state-space characterization of nominal stability with applications to robust estimation”, Automatica, Vol. 44, No. 7, pp. 1666-1675, 2008 (SCI)
  • M. Güney, E. Eskinat, Optimal Actuator and Sensor Placement in Flexible Structures using Closed-loop Criteria. Journal of Sound and Vibration, 2008 Vol. 312, No: 1-2, pp. 210 – 233 (SCI)
  • M.Tursun, E.Eskinat, Suppression of vibration using passive receptance method with constrained minimization, Shock and Vibration, 2008 Vol. 15 No:6, pp.639-654 (SCI)
  • Kunt Atalık, Group theoretical analysis and similarity solutions for stress boundary layers in viscoelastic flows, JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 153 (1), 62-71, 2008 (SCI)
  • Erturk, H., Gamba, M., Ezekoye, O.A., and Howell, J.R., February 2008, “Validation of Inverse Boundary Condition Design in a Thermometry Test Bed”, Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 109, pp.317-326 (SCI)
  • K. Dwarapureddy, Ercan Balikci, S. Ibekwe, and A. Raman: “Activation energy for growth in single size distribution and the dissolution features of ?' precipitates in the superalloy IN738LC” Journal of Materials Science, March 2008, pp. 1802- 1810 (SCI)
  • Ercan Balikci, and A. Raman: “The Relationship between activation energy and precipitate size for precipitate agglomeration”, Journal of Materials Science, volume 43, February 2008, pp. 927-932 (SCI)
  • Kaptan Y., Buyruk E., and Ecder A., "Numerical Investigation of Fouling Heat Exchanger Tubes with Conjugated Heat Transfer Approach", International Communications in Heat and Mass Transfer, 35, 1153-1158, 2008 (SCI)
  • Akbulut A. ve F.Ö. Sönmez, “Optimum design of composite laminates for minimum thickness,” Computers & Structures, Kasım 2008, 86: 1974–1982 (SCI)
  • Ertaş A.H., F.Ö. Sönmez, “A parametric study on fatigue strength of spot weld joints,” Fatigue & Fracture of Engineering Materials & Structures, 31: 766–776, Eylül 2008, (SCI)
  • C. Bagcioglu, Es Altuntas, Sinan Sen, M. B. Islier, O. G Ersoy, N. Ersoy, T. Nugay, and N. Nugay, "Exfoliation targeted toughness enhancement in polypropylene-blend-montmorillonite nanocomposites," Polymer International, 57:1395–1403 December 2008 (SCI)
  • Ihsan Efeoglu, Özlem Baran, Fatih Yetim, Sabri Altıntaş: “Tribological characteristics of MoS2–Nb solid lubricant film in different tribo-test “, Surface & Coatings Technology 203 (2008) 766–770 (SCI)
  • Önder Albayrak, Osman El-Atwani, Sabri Altıntaş: “Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: Effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition”, Surface & Coatings Technology, 202 (2008) 2482 -2487 (SCI)

 
2007 Papers (SCIE)
 

  • İlhan Polat, Eşref Eşkinat and İ. Emre Köse, "Dynamic Output Feedback Control of Quasi-LPV Mechanical Systems", IET Control Theory & Applications, Vol. 1, No. 4, 2007, SCI
  • Baslamisli, S. Caglar., Kose, I. Emre, Anlas, G., "Robust Control of Anti-lock Brake System", Vehicle System Dynamics 45 (3): 217-232 MAR 2007, SCI
  • Öztürk, U. Esat, Anlaş, Gunay, "Multiple compressive loading and unloading behavior of polymeric foams", Journal of Polymer Engineering, Volume: 27 Issue: 8 Pages: 607-619 Published: 2007, SCI
  • Orhan, M., Ecder, A. and Tezel, A., "Stability of Thermal Transpiration Flows in Rectangular Enclosures - Axisymmetric disturbances", International Communications in Heat and Mass Transfer, 34, 83-92 (2007), SCI
  • Ilicak M., Ecder, A., and Turan, E.,, "Operator Splitting Techniques for the Numerical Analysis of Natural Convection Heat Transfer", International Journal of Computer Mathematics, 84:6, 783-793 (2007), SCI
  • Orhan, M., Ecder A. and Tezel A., "Thermal Creep Flow of Rarefied Gases in Rectangular Enclosures; A Comparison between the Navier-Stokes and Burnett Models", Progress in Computational Fluid Dynamics, v 7, n 7, 404-413 (2007), SCI
  • A. Deal, Ercan Balikci, and R. Abbaschian "Enhanced Morphological Stability in Sb-Doped Ge", Metal-lurgical and Materials Transactions A, volume 38A, January 2007, pp. 100-115. SCI
  • Sönmez, F.Ö. and M. Akbulut, "Process Optimization of Tape Placement for Thermoplastic Composites," Composites Part A-Applied Science and Manufacturing, 38: 2013-2023, 2007, SCI.
  • Sönmez, F.Ö. and A. Demir, "Analytical Relations between Hardness and Strain for Cold Formed Parts," Journal of Materials Processing Technology, 186: 163-173, 2007, SCI
  • Sönmez, F.Ö., "Shape Optimization of 2D Structures Using Simulated Annealing" Computer Methods in Applied Mechanics and Engineering, 196: 3279-3299, 2007, SCI.
  • Guney, M., Eskinat, E., "Modeling of multilayered piezoelectric transducers with ultrasonic welding application", Smart Materials and Strucures. 2007 Vol. 16 pp. 541-554, SCI
  • A. Ök, Ş. Ozupek, E.B. Becker, "Crack simulation in pneumatic tyres using the finite element method", Journal of Automobile Engineering, 221, 2, 157-166, 2007, SCI
  • Wisnom MR, Potter KD, Ersoy N, "Shear-lag analysis of the effect of thickness on spring-in of curved composites" Journal of Composite Materials 41 (11): 1311-1324 JUN 2007, SCI
  • Garstka, T; Ersoy, N; Potter, KD, et al., "In situ measurements of through-the-thickness strains during processing of AS4/8552 composite," Composites Part A-Applied Science And Manufacturing, 38:: 2517-2526 (2007), SCI
  • Onder Albayrak, Cinar Oncel, Mustafa Tefek, Sabri Altintas, "Effects of Calcination on Electrophoretic Deposition of Naturally Derived and Chemically Synthesized Hydroxyapatite", Reviews on Advanced Materials Science, 15 (2007) 10-15, SCI
  • Ecder A. and Unsal R., "Multiple-Domain Analysis of Combustion of a Spherical Fuel Droplet", International Journal for Computational Methods in Engineering Science and Mechanics, 8:103-106 (2007).

2006 Papers (SCIE)

  • Ö Yıldız, Bedir, H., “A parallel solution to the radiative transport in three dimensional participating media”, NUMERICAL HEAT TRANSFER PART B, FUNDAMENTALS, 50:79-95, 2006 (SCI)
  • Wisnom, MR; Gigliotti, M; Ersoy, N; et al. “Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures” COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 37 (4): 522-529 2006 (SCI)
  • Ullum U., Wright J., Dayi O., Ecder, A., Soulaïmani A., Piche R. and Kamath H., "Reduction of Rotating Stall within an Impeller of a Centrifugal Pump Based upon Measured Pressure and Velocity Data", JOURNAL OF PHYSICS (CS), Volume 52, pp. 36-45, 2006.

2005 Papers (SCIE)

  • Oral A, Anlas G, “Effects of Radially Varying Moduli on Stress Distribution of Nonhomogeneous Anisotropic Cylindrical Bodies” INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 42 (20): 5568-5588 OCT 2005
  • Erdal, O. and Sönmez F.O., “Optimum Design of Composite Laminates for Maximum Buckling Load Capacity Using Simulated Annealing,” Composite Structures, 2005, 71:45-52.
  • Ersoy N, Potter K, Wisnom MR, et al. Development of spring-in angle during cure of a thermosetting composite COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 36 (12): 1700-1706 2005
  • Ersoy N, Potter K, Wisnom MR, et al. An experimental method to study the frictional processes during composites manufacturing COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 36 (11): 1536-1544 2005
  • Özüpek, Ş. and E. B. Becker, "Finite Element Method for the Study of Belt Edge Delaminations in Truck Tires", Rubber Chemistry and Technology, Vol.78, pp.557-571 2005.
  • Özüpek, Ş. and H. Cao, "The Effect of Anisotropy on Bovine Pericardial Tissue with Stress Concentration", Journal of Mechanics in Medicine and Biology, Vol.5, pp.397-413, 2005.

2004 Papers (SCIE)

  • Faryar Jabbari, İ. Emre Köse, Rate- and Magnitude Bounded Actuators: Scheduled Output Feedback Design, International Journal of Robust and Nonlinear Control, Vol. 14, No. 13-14, pp. 1169-1184, 2004.
  • Celik,C.E., Vardar, Ö. and Kalenderoglu,V.;Comparison of Retardation Behavior of 2024 T3 and 7075-T6 Al- alloys; Fatigue Fracture Engng Mater Struct Vol.27, pp 713-722, 2004
  • Örs, H., “Oil Transport in the Turkish Straits System, Part II: Simulation of the Contamination in the Dardanelles Strait”, Energy Sources (SCI) Vol. 26, No. 2, Ocak 16, 2004, pp.167-175.
  • Örs, H., S. L.Yılmaz, “Modélisation par Elements Finis de la Dissémination dans le détroit d’Istanbul”, La Houille Blanche (SCI), 2004, Vol. I, pp. 78-82.
  • Örs, H., S. L.Yılmaz, “A Stochastic Approach to the Modelling of Oil Pollution”, Energy Sources (SCI) Vol. 26, No. 9, Temmuz 16, 2004, pp. 879-884.
  • Atalık K., Keunings R., On the occurrence of even harmonics in the shear stress response of viscoelastic fluids in large amplitude oscillatory shear, Journal of Non-Newtonian Fluid Mechanics, 122(1-3), 107-116, 2004 (SCI).
  • Demir, A. and F.Ö. Sönmez, “Prediction of Brinell Hardness Distribution in Cold-Formed Parts,” Transactions of ASME; Journal of Engineering Materials Technology, October 2004, 126: 398-405.
  • Orbak Y. ,E. Eskinat, Türkay O. Effect of Physical Parameters on System Eigenvalues and its Use in Physical Model Reduction, Journal of the Franklin Institute, vol. 341, November 2004, pp. 613-655
  • A.Esin, N. Mahmutyazıcıoğlu, S. Altıntaş, “Drying and Sintering of Ceramic Based Parts Using Microwave Heating”, Key Engineering Materials, 264-269, 731-734, 2004.
  • Ş. Gören, H. Gökbayrak , S. Altıntaş, “Production of Hydroxylapatite From Animal Bone”, Key Engineering Materials, 264-269, 1949-1952, 2004.
  • D. Nural, S. Altıntaş, “Investigations on Depth of Regions of Cut Surfaces Generated with Abrasive Waterjets”, Key Engineering Materials, 264-269, 969-952, 2004.
  • A. S. Onay, S. Altıntaş, “ Effects of Sintering Parameters on Initial Magnetic Permeability of Ni-Zn Ferrite”, Key Engineering Materials, 264-269, 1277-1280, 2004.
  • G. Pirge, C.V. Hyatt, S. Altıntaş, “Characterization of NiMnGa magnetic shape memory alloys”, J. Materials Processing Technology, 155-156, 1266-1272, 2004.
  • Ersoy, N., Potter, K., Clegg, M., and Wisnom, M. R., Development of Spring-In Angle During Cure of a Thermosetting Composite, accepted by Composites A, 2004
  • Ersoy, N., Potter, K., Clegg, M., and Wisnom, M. R., An Experimental Method to Study the Frictional Processes During Composites Manufacturing, accepted by Composites A, 2004
  • M. R. Wisnom, M. Gigliotti, N. Ersoy, M. Campbell and K. D. Potter, Mechanisms Generating Residual Stresses and Distortion during Manufacture of Polymer Matrix Components, accepted by Composites A, 2004

2003 Papers (SCIE)

  • Heper, R. and Vardar, Ö. “Elastic-plastic material response of fatigue crack surface profiles due to overload interactions” International Journal of Fatigue, 25 (2003) 801-810
  • Shi, J., Savaş, M. A., Yang, B. J. and Smith, *R. W. “Spheroidal graphite ferritic cast iron-an ideal model material to examine the deformation a single phase matrix containing soft-spheroidal inclusions” International J. of Cast Metals Research 2003 Vol. 16 Nos. 1-3 215
  • Köse, İ. E., Jabbari, F “Scheduled controllers for linear systems with bounded actuators” automatica 39 (8): 1377-1387 AUG 2003
  • Yılmaz, S. L. and Örs, H., “Oil Transport in the Turkish Straits System: Simulation of the Contamination in the Istanbul Strait” Energy Sources (SCI), Volume 25, Number 11, November 2003
  • Eşkinat, E. “Dynamic Consistency Relations for Process Modeling” AIChE Journal, August 2003, pp. 2224-2227.
  • Orbak, Y., Türkay, O. S., Eşkinat, E., “Youcef -Toumi, Model Reduction in the Physical Domain” Proc. IMechE, Vol. 217 Part I: J Systems and Control Engineering, December 2003 pp. 481-496

2002 Papers (SCIE)

  • Anlas, G., Santare, M. H. ve Lambros J., “Dominance of Asymptotic Crack Tip Fields in Elastic Functionality Graded Materials”, International Journal of Fracture, 115, (2), 193-204, 2002. (SCI)
  • Anlas, G. and Elbeyli, O., “The Nonlinear Vibrations of a Simply Supported Rectangular Metallic Plate Subject to Transverse Harmonic Excitation in the Presence of a One-to-One Internal Resonance”, Nonlinear Dynamics, 30, 1-28, 2002. (SCI)
  • Köse, İ. E., “IQC-Based L2-Control of Linear Periodic Systems”, Systems and Control Letters, 47, (3), 199-209, 2002. (SCI)
  • M. A. Savas, B. J. Yang, R. W. Smith, Diffusion couple preparation using cast coating technique, Journal of Materials Science, 37, 4093-4099, 2002.
  • J. Shi, M. A. Savas, R. W. Smith, Plastic Deformation of a Model Material Containing Soft Spheroidal Inclusions: Spheroidal Graphite Cast Iron, Journal of Materials Processing Technology, 6442, 1-7, 2002. (SCI)
  • Çolak, Z.S, F.Ö. Sönmez and V. Kalenderoğlu, “Process Modeling And Optimization of Resistance Welding for Thermoplastic Composites, Journal of Composite Materials, 36(6): 721-744, March 2002. (SCI)
  • Sönmez F.Ö. and E. Eyol, “Optimal Post-Manufacturing Cooling Paths for Thermoplastic Composites”, Composites Part A-Applied Science and Manufacturing, 33(3): 301-314, March 2002. (SCI)
  • Sönmez F.Ö., H.T. Hahn and M. Akbulut, “Analysis of Process-Induced Residual Stresses in Tape Placement,” Journal of Thermoplastic Composite Materials, 15(6): 525-544, November 2002. (SCI)

2001 Papers (SCIE)

  • Anlaş, G. and Göker, G., “Vibration Analysis of Skew Fiber-Reinforced Composite Laminated Plates”, Journal of Sound and Vibration, Vol. 242, No. 2, pp. 265-276, April 2001.
  • Anlaş, G. And Tüzer, Ö., “Design of Laminated Composite Plates Containing a Hole Under in-Plane Loadings”, Journal of Reinforced Plastics and Composites, Vol. 20, No. 12, pp. 1024-1035, August 2001
  • Ecder, A. “Partitioning Strategies for Parallel Domain Decomposition in Modelling Transport Phenomena", Progress in Computational Fluid Dynamics, Volume 1, Number 4, pp. 188-193, 2001.

2000 Papers (SCIE)

  • Şafak, K. K. and Türkay, O. S., “Experimental Identification of a Universal Motor Dynamics Using Neural Networks”, Mechatronics, Vol. 10, No. 8, pp.881-896, 2000
  • Ersoy, N. and Vardar, Ö., “Measurement of Residual Sresses in Layered Composites”, J.of Composite Materials, Vol. 34, No 7, pp. 575-598, April 2000
  • Anlaş, G. Santare M.H., Lambros J., “Numerical Calculation of Stress Intensity Factors in Functionally Graded Materials”, Int. Journal of Fracture Vol. 104, pp. 131-143. July 2000
  • Elbeyli, Ö and Anlaş, G., “The Nonlinear Response of simply supporled Pectanpular Metallic Plate to Transverse Harmonic Excitation Journal of Applied Mechanics”, Vol. 67, No. 3, pp. 621-626,. 2000
  • Frate F. C., Bedir, H., Sung CJ, T’ien JS, “On flammability limits of dry CO/O2 Opposed-Jet Diffusion Flames”, Proceedings of the Combustion Institute, Volume 28, pp. 2047-2054, 2000

1999 Papers (SCIE)

  • Lambros, j., Narayanaswamy, A., Santare, M. H., Anlaş, G., “Manufacture and testing of a functionally graded material”, Journal of Engineering Materials and Technology Transactions of the ASME”, Vol. 121, No. 4, pp. 488-493, 1999.
  • Anlaş, G., “Effect of Two-to-One Internal in a Nonlinearly Restrained Fluid Valve”, Journal of Vibration and Acoustics, Vol. 121, No.1,pp. 59-63, 1999
  • Ardic, S., Anlaş, G. and Eraslanoğlu, G., “Failure Prediction for Laminated Composites Under Multiaxaial Loading”, Journal of Reinforced Plastics and Composites, Vol. 18, No.2, pp. 138-150, 1999
  • Kayran A. and Anlaş, G., “Effect of Stacking Sequence on Free Vibration Frequencies of Laminated Composite Circular Cylindrical Shells”, Journal of Vibration and Control, Vol.5, No. 3, pp. 355-375, 1999
  • Köse, İ. E. and Jabbari, F., “Robust Control of Lincar Systems with Real Parametric -Uncertainties”, Automatica, Vol. 35, Ro. 4, pp.679-687, 1999
  • Köse, İ. E. and Jabbari, F., “Control or LPV Systems with Partly-Measured Parameters” IEEE Transactions on Automatic Control, Vol. 44. No.3.pp.658-664,1999
  • Shih, h. Y., Bedir, H., James S.T’ien , Chih-Jen Sung, “Computed Flammability Limits of Opposed Jet H2/02/C02 Diffusion Flames At Pressure”, J. Of Propulsion &Power 15,6,pp. 903-908, 1999
  • Ekici, B. and Altıntaş, S., "Surface Modification for Improving the Formability of SPA Laminated Composite" , Journal of Advances in Engineering Software, Vol. 30, pp. 451-458, 1999.

1998 Papers (SCIE)

  • Babetty, Z., Sümer, A., Altıntaş, S., "Knot Properties of Alternating Sliding Knots with Different Patterns in Comparison to Alternating and Simple Sliding Knots", Journal of American College of Surgeons, 186, No. 5, 1998.
  • Babetty, Z., Sümer, A., Ergüney, S., Göksel, S., Altıntaş, S. "Changes in Knot-Holding Capacity of Sliding Knots in vivo and Tissue Reaction", Archieves of Surgery, 133, 727 – 734, 1998.
  • Bayraktar, E., Altıntaş, S., "Some Problems in Steel Sheet Forming Processes", Journal of Materials Processing Technology, Vol. , No. 80., pp. 83-89, 1998.
  • Sönmez, F.Ö. and H.T. Hahn, “Thermomechanical Analysis of the Laminated Object Manufacturing (LOM) Process” Rapid Prototyping Journal, January 1998, 4(1): 26-36.
  • Türkay, O. S., Sümer, I. T., Tugcu, A.K. and Kıray, B., “Modeling and Experimental Assessment of Suspension Dynamics of an Horizontal-Axis Washing Machine”, ASME Transactions Journal of Vibration and Acoustics, Vol. 120, No., pp.532-543 1998