Publications

2023 Papers (SCIE)

Kapan, E., Alkan, S., Aydiner, C. C., & Mason, J. K. (2023). Energetic contributions to deformation twinning in magnesium. Modelling and Simulation in Materials Science and Engineering, 31(7), Article 075002. https://doi.org/10.1088/1361-651X/acec8c
Mutlu, F., Anlas, G., & Sehitoglu, H. (2023). The effect of microstructural barriers on transient crack growth in shape memory alloys. Smart Materials and Structures, 32(9), Article 095006. https://doi.org/10.1088/1361-665X/ace74d
Mutlu, F., Anlas, G., & Sehitoglu, H. (2023). Crack Initiation Angle in Single Crystal Shape Memory Alloys. Shape Memory and Superelasticity, 9(3), 427-436. https://doi.org/10.1007/s40830-023-00439-9
Aryanfar, A., Tayyar, A., & Goddard III, W. A. (2023). Dendritic propagation on circular electrodes: The impact of curvature on the packing density. Physical Review E, 108(1), Article 014801. https://doi.org/10.1103/PhysRevE.108.014801
Erman, S. C., Stainier, L., & Aydiner, C. C. (2023). Guiding severely anisotropic twinning bands in Magnesium: An in situ investigation by full-field microscopic image correlation. Materials Today Communications, 35, Article 106203. https://doi.org/10.1016/j.mtcomm.2023.106203
Asma, A., Altun, E., Bekiloglu, H. E., Bedir, H., & Anlas, G. (2023). Steady-state interconnected cycle modeling and experimental results of a lab-scale ORC. Applied Thermal Engineering, 228, Article 120521. https://doi.org/10.1016/j.applthermaleng.2023.120521
Husain, S. M., Ipek, M., Caglayan, A., Aynur, T. N., Kocaturk, S., & Bedir, H. (2023). Dynamic modelling of the steady state and load processing operation of a domestic refrigerator cooled through natural convection. International Journal of Refrigeration, 146, 15-27. https://doi.org/10.1016/j.ijrefrig.2022.08.015
Kayatas, E., & Celik, M. (2023). The effects of dihedral angle on hover rigidity and planar maneuvers in rotary-wing UAVs. Aircraft Engineering and Aerospace Technology, 95(7), 1029-1036. https://doi.org/10.1108/AEAT-08-2022-0215
Saridede, E., Yediyildiz, S., & Celik, M. (2023). Experimental Investigation of the CFHT-27 Cusped-Field Hall Thruster Performance. Journal of Aerospace Technology and Management, 15, Article e0523. https://doi.org/10.1590/jatm.v15.1294
Kokal, U., Saridede, E., & Celik, M. (2023). Development and tests of a thrust stand with an in-situ null position adjustment and calibration method for low power plasma thrusters. Results in Engineering, 18, Article 101219. https://doi.org/10.1016/j.rineng.2023.101219
Saridede, E., & Celik, M. (2023). LaB6 hollow cathode with a novel graphite heater. Vacuum, 216, Article 112383. https://doi.org/10.1016/j.vacuum.2023.112383
Engul, M., & Ersoy, N. (2023). From Flat Plates to Sinusoidal Structures: Influence of Geometry on the Energy Absorption Capability of Carbon/Epoxy Composites. Journal of Composites Science, 7(2), Article 56. https://doi.org/10.3390/jcs7020056
Engul, M. C., & Ersoy, N. (2023). Energy absorption capability of carbon/epoxy composite laminates: A novel numerical approach. Journal of Reinforced Plastics and Composites, 42(23-24), 1262-1276. https://doi.org/10.1177/07316844221150619
Haratoka, C., Yalcin, R. A., & Erturk, H. (2023). Examination of energy and visual comfort performance of thermo-chromic coatings for cellular offices. Energy, 267, Article 126517. https://doi.org/10.1016/j.energy.2022.126517
Yazici, H. I., Erturk, H., & Liu, F. (2023). Different necking models in predicting the measured scattering matrix of soot aggregates. Journal of Aerosol Science, 172, Article 106194. https://doi.org/10.1016/j.jaerosci.2023.106194
Erturk, H., Daun, K., Franca, F. H. R., Hajimirza, S., & Howell, J. R. (2023). Inverse Methods in Thermal Radiation Analysis and Experiment. ASME Journal of Heat and Mass Transfer, 145(5), Article 050801. https://doi.org/10.1115/1.4056371
Yazici, H. I., Erturk, H., & Liu, F. (2023). Effect of necking and polydispersity in aggregate and primary particle size on the scattering matrix of soot aggregates. Journal of Aerosol Science, 173, Article 106226. https://doi.org/10.1016/j.jaerosci.2023.106226
Hamarat, M., Kaewunruen S. (2023), A novel damage assessment method in Peridynamic simulations. Applied Mathematical Modelling 123, 274-294.
Kokan, E. C., Atik, A. Y., Ozupek, S., & Podnos, E. (2023). Structural Assessment of Endodontic Files via Finite Element Analysis. Applied Sciences-Basel, 13(18), Article 10293. https://doi.org/10.3390/app131810293
Gaeta, L. T., McDonald, K. J., Kinnicutt, L., Le, M., Wilkinson-Flicker, S., Jiang, Y., Atakuru, T., Samur, E., & Ranzani, T. (2023). Magnetically induced stiffening for soft robotics. Soft Matter, 19(14), 2623-2636. https://doi.org/10.1039/d2sm01390h
E. Karabıyık, S. Öncü, E. Samur, (2023) Investigation of an efficient model-based fuel economy optimization methodology for diesel engines focusing on real world driving emission cycles, International Journal of Engine Research, 24(4), 1483-1498. https://doi:10.1177/14680874221088537
Gokyer, Y., & Sonmez, F. O. (2023). Topology optimization of cylindrical shells with cutouts for maximum buckling strength. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(1), Article 13. https://doi.org/10.1007/s40430-022-03941-w
Alpay Y.O, F.E. Öz, F.Ö. Sönmez, K. Çınar (2023) Failure behavior of laminated composite plates under anticlastic bending, Journal of Reinforced Plastics and Composites, 42(7-8), 281-299.
Kocak, K., & Yilmaz, C. (2023). Design of a compliant lever-type passive vibration isolator with quasi-zero-stiffness mechanism. Journal of Sound and Vibration, 558, Article 117758. https://doi.org/10.1016/j.jsv.2023.117758
Otlu, S. N., Acar, B., Tetik, Z. G., & Yilmaz, C. (2023). Three-dimensional ultra-wide elastic metamaterial with inertial amplification mechanisms having optimized flexure hinges. International Journal of Solids and Structures, 282, Article 112453. https://doi.org/10.1016/j.ijsolstr.2023.112453
A.A. Kulaksizoglu, C. Yalcin, C. Yilmaz (2023), Analytical and experimental investigation of a motion amplified rotational friction damper, Engineering Structures, 288, Article 116184.
A.A. Kulaksizoglu, C. Yilmaz, C. Yalcin (2023), Experimental and numerical study of a motion amplification mechanism to enhance the seismic dissipation capacity of precast, post-tensioned concrete rocking systems, PCI Journal, 69(6), 24-45.

2022 Papers (SCIE)

G. Özerim, G. Anlaş, and Z. Moumni, “The effect of heat treatment on pseudoelastic behavior of Spark Plasma Sintered Niti,” Materials Today Communications, vol. 31, p. 103819, 2022.
G. Ozerim, Z. Moumni, and G. Anlas, “A poromechanics-based phenomenological model for porous shape memory alloys,” Shape Memory and Superelasticity, vol. 8, no. 4, pp. 413–424, 2022.
M. Szczesiak and H. I. Basturk. "Adaptive boundary control for wave PDE on a domain with moving boundary and with unknown system parameters in the boundary dynamics." Automatica, vol. 145, p.110526, 2022.
O. Kaya and N. Donmezer. "Investigation of the Thermal Transport Properties across Van der Waals Interfaces of 2D Materials." IEEE Transactions on Nanotechnology, vol. 21, pp. 592-597, 2022.
C. Haratoka, R. A. Yalcin, and H. Erturk, “Design of thermo-chromic glazing windows considering energy consumption and visual comfort for cellular offices,” Solar Energy, vol. 241, pp. 637–649, 2022.
B. Li, B. Zhang, J. Song, R. Hu, H. Ertürk, Z. Luo, and Q. Cheng, “Performance analysis of near-field tandem thermophotovoltaic systems based on radiative absorption distribution,” International Communications in Heat and Mass Transfer, vol. 139, p. 106488, 2022.
C. Yildirim, H. Erturk, K. Pekkan, S. Deniz, and E. C. Serefoglu. "A novel method for hemodynamic analysis of penile erection." International Journal of Impotence Research, vol. 34, no. 1, pp. 55-63, 2022.
U.I. Ayberk and S. Öncü, "Design of a Multi-Objective Lateral Controller for Highly Automated Vehicles." ASME. Journal of Dynamic Systems Measurement and Control, vol. 144, no. 10, p.101004, 2022.
S. Demirtas, T. Cankurt, and E. Samur, “Development and implementation of a collaborative workspace for industrial robots utilizing a practical path adaptation algorithm and augmented reality,” Mechatronics, vol. 84, p. 102764, 2022.
M.U. Demir, C. Yilmaz. “A three-axis modular horizontal vibration isolation system with adjustable stiffness: design, analysis and experimental validation”, Journal of Sound and Vibration, vol. 541, p.117351, 2022.
M.U. Demir, C. Yilmaz. “Analysis and design of an adjustable stiffness three-axis horizontal vibration isolator using elastic columns and a string in tension”, Journal of Sound and Vibration, vol. 523, p.116736, 2022.

2021 Papers (SCIE)

Özdur, N.A., Üçel, İ.B., Yang, J., Aydıner C.C., “Residual intensity as a morphological identifier of twinning fields in microscopic image correlation”, Experimental Mechanics, vol. 61, no. 3, pp. 499-514, 2021.
Kararsiz, G., Paksoy, M., Metin, M., Basturk, H.I., “An adaptive control approach for semi-active suspension systems under unknown road disturbance input using hardware-in-the-loop simulation”, Transactions of the Institute of Measurement and Control vol. 43, no. 5, pp. 995-1008, 2021.
Guryuva, S., Bedir, H., “The Utilisation of Reduced Kinetics by Local Self-Similarity Tabulation Approach in 3D Turbulent Reactive Flow Simulation with LES and TPDF”, Flow, Turbulence and Combustion, vol. 107, pp. 1035-1063, 2021.
Kokal, U., Turan, N., Çelik, M., “Thermal Analysis and Testing of Different Designs of LaB6 Hollow Cathodes to Be Used in Electric Propulsion Applications”, Aerospace, vol. 8, no. 8, p. 215, 2021.
Warzoha, R.J., Wilson, A.A., Donovan, B.F., Donmezer, N., Giri, A., Hopkins, P.E., Choi, S., Pahinkar, D., Shi, J., Graham, S., Tian, Z., Ruppalt, L., “Applications and impacts of nanoscale thermal transport in electronics packaging”, Journal of Electronic Packaging, vol. 143, no. 2, p. 020804, 2021.
Yüksel, O., Sandberg, M., Baran, İ., Ersoy, N., Hattel, J.H., Akkerman, R., “Material characterization of a pultrusion specific and highly reactive polyurethane resin system: Elastic modulus, rheology, and reaction kinetics”, Composites Part B: Engineering, vol. 207, p. 108543, 2021.
Demirkır, Ç., Ertürk, H., “Convective heat transfer and pressure drop characteristics of graphene-water nanofluids in transitional flow”, International Communications in Heat and Mass Transfer, vol. 121, p.105092, 2021.
Yalçın, R.E., Ertürk, H., “Monte Carlo method solution of the broadband fluorescent radiative transfer equation considering fluorescent cascade”, Applied Optics, vol. 60, no. 4, pp. 1068-1077, 2021.
Tutcu, C., Baydere, B.A., Talas, S.K., Samur, E., “Quasi-static modeling of a novel growing soft-continuum robot.”, The International Journal of Robotics Research, vol. 40, no. 1, pp. 86-98, 2021.
Kirtas, O., Savas, Y., Bayraker, M., Baskaya, F., Basturk, H., Samur, E., “Design, implementation, and evaluation of a backstepping control algorithm for an active ankle–foot orthosis”, Control Engineering Practice, vol. 106, p. 104667, 2021.
Özyar, O., Yılmaz, Ç., “A self-tuning adaptive-passive lever-type vibration isolation system”, Journal of Sound and Vibration, vol. 505, p. 116159, 2021.

2020 Papers (SCIE)

Sengor, M.; Ozgun, A.; Gunduz, O.; Altintas, S., “Aqueous electrospun core/shell nanofibers of PVA/microbial transglutaminase cross-linked gelatin composite scaffolds”, MATERIALS LETTERS, 263, Mart 2020
Mutlu, F., Anlas, G., Mounmi, Z., “Effect of loading rate on fracture mechanics of NiTi SMA”, INTERNATIONAL JOURNAL OF FRACTURE, 224: 151-165, Haziran 2020
Bilgi, C., Atalık, K., “Effects of blood viscoelasticity on pulsatile hemodynamics in arterial aneurysms”, Journal of Non-Newtonian Fluid Mechanics, 279:104263, Mayıs 2020
Shafaghi, N., Kapan, E., Aydıner, C.C, “Cyclic Strain Heterogeneity and Damage Formation in Rolled Magnesium Via In Situ Microscopic Image Correlation”, Experimental Mechanics, 60, 735-751 2020. https://doi.org/10.1007/s11340-020-00612-6.
Ozdur, N.A.; Ucel, I.B.; Yang, J.; Aydiner, C.C., “Residual Intensity as a Morphological Identifier of Twinning Fields in Microscopic Image Correlation”, EXPERIMENTAL MECHANICS, Ekim 2020
Yilmaz, C. T., & Basturk, H. I. “Adaptive output regulator for wave PDEs with unknown harmonic disturbance” Automatica, 113, 108808, 2020
Szczesiak, M., & Basturk, H. I. “Adaptive boundary control for wave PDEs with unknown in-domain/boundary disturbances and system parameter”, Automatica, 120, 109115, 2020
Kararsiz, G., Paksoy, M., Metin, M., & Basturk, H. I. “An adaptive control approach for semi-active suspension systems under unknown road disturbance input using hardware-in-the-loop simulation” Transactions of the Institute of Measurement and Control, 0142331219895935, 2020
Bekiloğlu H.E., Bedir H., Anlaş G., “Organic rankine cycle optimization with explicit designs of evaporator and radial inflow turbine”, Journal of Energy Resources Technology Volume 142, July 2020 / 072103-1 (DOI: 10.1115/1.4046942).
A2. Özgül E., Şimşek M., Bedir H., " Use of thermodynamical models with predictive combustion and emission capability in virtual calibration of heavy duty engines", Fuel Volume 264, 15 March 2020, 116744 (DOI:10.1016/j.fuel.2019.116744).
Albar, I; Donmezer, N. “Mean Free Path–Thermal Conductivity Accumulation Calculations for Wurtzite Gallium Nitride: Two Approaches”, Nanoscale and Microscale Thermophysical Engineering, 24:2, 80-93, Nisan 2020.
Chatterjee, B.; Dundar, C.; Beechem, T. E.; Heller, E.; Kendig, D.; Kim, H.; Donmezer, N.; and Choi, S., “Nanoscale electro-thermal interactions in AlGaN/GaN high electron mobility transistors”, Journal of Applied Physics, 127, 044502, Ocak 2020.
Dundar, C.; Kara, D.; and Donmezer, N., “The Effects of Gate-Connected Field Plates on Hotspot Temperatures of AlGaN/GaN HEMTs”, IEEE Transactions On Electron Devices, Vol. 67, No. 1, Ocak 2020
Oz, F.E.; Mehdikhani, M.; Ersoy, N.; Lomov, S.V., “In-situ imaging of inter- and intra-laminar damage in open-hole tension tests of carbon fibre-reinforced composites”, COMPOSITE STRUCTURES, 244, Temmuz 2020
Cinar, K.; Guven, I.; Ersoy, N., “Effect of residual stress on the bending response of L-shaped composite laminates”, 246, Ağustos 2020
Yalcin, R.A.; Erturk, H., “Improving crop production in solar illuminated vertical farms using fluorescence coatings”, BIOSYSTEMS ENGINEERING, 193: 25-36, Mayıs 2020
Demirkir, C.; Erturk, H.; “Rheological and thermal characterization of graphene-water nanofluids: Hysteresis phenomenon”, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 149, Mart 2020
Kocer, E.; Mason J.K.; Erturk, H., “Continuous and optimally complete description of chemical environments using Spherical Bessel descriptors”, AIP ADVANCES, 10, Ocak 2020
Avsar, D.; Erturk, H.; Menguc, M.P., “Absorption and plasmon resonance of Bi-metallic core-shell nanoparticles on a dielectric substrate near an external tip”, JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER, 241, Ocak 2020
Şeref K. T., Baydere B.A., Altınsoy T., Tutcu C., Samur E., “Design and Development of a Growing Pneumatic Soft Robot”, Soft Robotics, 7: 521-533, Ağustos 2020
Özcan, M.U, Ç. Yılmaz, F.Ö. Sönmez, “Visco-hyperelastic material modeling using nested linkage mechanisms, International Journal of Solids and Structures”, Haziran 2020, 193-194:393-404
Q. Lu, S. Huberman, H. Zhang, Q. Song, J. Wang, G. Vardar, A. Hunt, I. Waluyo, G. Chen, B. Yildiz, “Bi-directional tuning of thermal transport in SrCoO x with electrochemically induced phase transitions” Nature Materials 19, 655–662(2020)
Y. Kim, D. Kim, R. Bliem, G. Vardar, I. Waluyo, A. Hunt, J. T Wright, J. P. Katsoudas, Bilge Yildiz, “Thermally Driven Interfacial Degradation between Li7La3Zr2O12 Electrolyte and LiNi0.6Mn0.2Co0.2O2 Cathode” Chem. Mat. (2020)
O. Yuksel, C. Yılmaz, “Realization of an Ultrawide Stop Band in a 2-D Elastic Metamaterial with Topologically Optimized Inertial Amplification Mechanisms”, International Journal of Solids and Structures, vol. 203, pp. 138-150, 2020.
M. K. Saleem, C. Yılmaz, C. Basdogan, “Tactile Perception of Virtual Textures Displayed by Friction Modulation via Ultrasonic Actuation”, IEEE Transactions on Haptics, vol. 13, no. 2, pp. 368-379, 2020.
Keskin, O., Unal, A. C., Kararsiz, G., Yilmaz, T., & Yesilyaprak, C.. “Modelling and simulation studies on adaptive controller for alt-azimuth telescopes despite unknown wind disturbance and mass”, Advances in Mechanical Engineering, 12(9), 1687814020954767, 2020

2019 Papers (SCIE)

Alkan S., Sehitoglu H., “Prediction of Transformation Stresses in Niti Shape Memory Alloy” Acta Materialia, 175, 182-195, 2019
Abuzaid W., Wu Y., Sidharth R., Brenne F., Alkan S., Vollmer M., Krooss P., Niendorf T., Sehitoglu H., “Femnnial Iron-Based Shape Memory Alloy: Promises And Challenges” Shape Memory and Superelasticity, 5, 263-277, 2019
Alkan, S.; Sehitoglu, H. “Plastic Flow Resistance of Niticu Shape Memory Alloy-Theory and Experiments” Acta Materialia , 163, 173-188, 2019
Zhang, YH; You, YJ; Moumni, Z; Anlas, G ; Zhu, JH; “Stored-Energy-Based Fatigue Criterion for Shape Memory Alloys” 28, 6, Article Number: 065027, 2019
Zhang, YH; Moumni, Z; You, YJ; Zhang, WH; Zhu, JH; Anlas, G; “Multiscale TRIP-Based Investigation of Low-Cycle Fatigue of Polycrystalline Niti Shape Memory Alloys” International Journal of Plasticity, 115,307-329, 2019
You, YJ; Gu, XJ; Zhang, YH; Moumni, Z; Anlas, G; Zhang, WH; “Effect of Thermomechanical Coupling on Stress-Induced Martensitic Transformation Around the Crack Tip of Edge Cracked Shape Memory Alloy” International Journal of Fracture , 216, 1,123-133, 2019
Bekiloglu, Hasan Eren; Bedir, Hasan; Anlas, Gunay; “Multi-Objective Optimization of ORC Parameters and Selection of Working Fluid Using Preliminary Radial Inflow Turbine Design” Energy Conversion and Management, 183, 833-847, 2019
Guven, Metin; Bedir, Hasan; Anlas, Gunay “Optimization and Application of Stirling Engine for Waste Heat Recovery from a Heavy-duty Truck Engine” Energy Conversion and Management, 180, 411-424, 2019
Sahin, Caglar; Atalik, Kunt; “Effects of Polymer/Surfactant Additives on Forced Convective Heat Transfer in Vortex Shedding Flow Past a Circular Cylinder” International Journal of Thermal Sciences , 145, UNSP 106031, 2019
Bilgi, Coskun; Atalik, Kunt; “Numerical Investigation of the Effects of Blood Rheology and Wall Elasticity in Abdominal Aortic Aneurysm Under Pulsatile Flow Conditions” Biorheology 56, 1, 51-71, 2019
Sahin, Caglar; Atalik, Kunt; “Comparison of Inelastic and Elastic Non-Newtonian Effects on the Flow Around a Circular Cylinder in Periodic Vortex Shedding” Journal of Non-Newtonian Fluid Mechanics 263, 1-14, 2019
Üçel, İ. Buğra, Enver Kapan, Olcay Türkoğlu, C. Can Aydıner, “In Situ Investigation of Strain Heterogeneity and Microstructural Shear Bands in Rolled Magnesium AZ31”, International Journal of Plasticity, 118: 233–51, 2019.
Montakhab, M.; Balikci, E. “Integrated Computational Alloy Design of Nickel-Base Superalloys” Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 50a, 7, 3330-3342, 2019
Yilmaz, Cemal Tugrul; Basturk, Halil Ibrahim; “Output Feedback Control for Unknown Lti Systems Driven by Unknown Periodic Disturbances” Automatica, 99, 112-119, 2019
Basturk, Halil Ibrahim; Ayberk, Ilhan Umur, “Backstepping Boundary Control of a Wave Pde With Spatially Distributed Time Invariant Unknown Disturbances” IEEE Transactions On Automatic Control 64, 8, 3469-3475, 2019
Ozgul, Emre; Bedir, Hasan; “Fast Nox Emission Prediction Methodology Via One-Dimensional Engine Performance Tools in Heavy-Duty Engines” Advances in Mechanical Engineering , 11, 4, 2019
Yildiz, M. Serhan; Celik, Murat; “Plume Diagnostics of Bustlab Microwave Electrothermal Thruster Using Langmuir and Faraday Probes” Plasma Science & Technology, 21, 4, 2019
Apaydin, Ege; Celik, Murat; “Investigation of The Plasma Parameters of a Laboratory Argon Plasma Source Using a Collisional Radiative Model with the Comparison of Experimental And Simulated Spectra” Spectrochimica Acta Part B-Atomic Spectroscopy, 160, UNSP 105673 , 2019
Azarifar, Mohammad; Kara, Dogacan; Donmezer, Nazli; “Thermal Spreading Performance of Gan-On-Diamond Substrate Hemts With Localized Joule Heating” Isı Bilimi ve Tekniği Dergisi-Journal of Thermal Science and Technology, 39, 2, 111-119, 2019
Yuksel, O; Baran, I; Ersoy, N; Akkerman, R; “Investigation of Transverse Residual Stresses in a Thick Pultruded Composite Using Digital Image Correlation with Hole Drilling” Composite Structures, 223, UNSP 110954, 2019
M Damghani, N Ersoy, M Piorkowski, A Murphy, “Experimental Evaluation of Residual Tensile Strength of Hybrid Composite Aerospace Materials After Low Velocity Impact” Composites Part B: Engineering 179, 107537, 2019
Oz, Fatih E.; Ahmadvashaghbash, Sina; Ersoy, Nuri, “Damage Mode Identification in Transverse Crack Tension Specimens Using Acoustic Emission and Correlation With Finite Element Progressive Damage Model” Composites Part B-Engineering, 165, 84-95, 2019
OB Eriçok, AK Özbek, AT Cemgil, H Ertürk “Gaussian Process and Design of Experiments For Surrogate Modeling of Optical Properties of Fractal Aggregates” Journal of Quantitative Spectroscopy and Radiative Transfer 239, 106643, 2019
Akiner, T; Kocer, E; Mason, JK; Erturk, H; “Green-Kubo Assessments of Thermal Transport in Nanocolloids Based on Interfacial Effects” Materials Today Communications, 20, UNSP 100533, 2019
Yalcin, Refet Ali; Erturk, Hakan; “Improving Photosynthetic Efficiency Using Greenhouse Coatings with Scattering and Fluorescent Pigments” Materials Research Express, 6, 8, 085551, 2019
Atik, Ozgur; Erturk, Hakan; “Enhancement of Central Processing Unit Liquid Cooling Performance Using Hexagonal Boron Nitride Nanofluids” Journal of Thermal Science and Engineering Applications, 11, 3, 034501, 2019
Avsar, Dilan; Erturk, Hakan; Menguc, M. Pinar; Plasmonic Responses of Metallic/Dielectric Core-Shell Nanoparticles on a Dielectric Substrate, Materials Research Express, 6, 6, 65006, 2019
Kocer, Emir; Mason, Jeremy K.; Erturk, Hakan; “A Novel Approach to Describe Chemical Environments In High-Dimensional Neural Network Potentials” Journal of Chemical Physics 150,15, 154102, 2019
Yurdabak, V., Ş. Özüpek, “Explicit Solution Methods in Quasi-Static Analyses of Rubber-Like Materials”, Rubber Chemistry and Technology, 92 (2) 399-413, 2019
Tunç, B., Ş. Özüpek, E. Podnos, U. Arkun, “Thermal Cyclic Stress Analysis of a Solid Rocket Motor”, Journal Of Spacecraft And Rockets 56, No. 1, 2019
Hojatmadani, M., Samur, E., “Contribution of Artificial Proprioception on a Dynamic Finger Flexion Task”, Turkish Journal of Electrical Engineering and Computer Science, 27: 139-152, 2019.
C Tutcu, BA Baydere, SK Talas, E Samur, “Quasi-Static Modeling of a Novel Growing Soft-Continuum Robot” The International Journal of Robotics Research, 0278364919893438-2019
Kalkandelen, C; Ulag, S; Ozbek, B; Eroglu, Go; Ozerkan, D; Kuruca, Se; Oktar, Fn; Sengor, M; Gunduz, O “3d Printing of Gelatine/Alginate/Beta-Tricalcium Phosphate Composite Constructs For Bone Tissue Engineering” Chemistryselect 4 Issue: 41 Pages: 12032-12036, 2019
J Wang, S Bishop, L Sun, Q Lu, G Vardar, R Bliem, N Tsvetkov, E Crumlin, “Threshold Catalytic Onset of Carbon Formation on CeO2 during CO2 Electrolysis: Mechanism and Inhibition” Journal of Materials Chemistry A, 7, 15233, 2019
Orta, A. H., Yilmaz, C., “Inertial Amplification Induced Phononic Band Gaps Generated by a Compliant Axial to Rotary Motion Conversion Mechanism”, Journal of Sound and Vibration, Vol. 439, Pp. 329-343, 2019
A. Oktav, C. Yilmaz, G. Anlas, “Improvement of Low Frequency Booming Problem in Automobiles Using Tuned Mass Damper”, Journal of The Faculty of Engineering and Architecture of Gazi University, Vol. 34, No. 2, Pp. 891-903, 2019
Oktav, A., Gavgani, V., Anlas, G., Yilmaz, C., “Reducing Force Transmission Through Exhaust Mounts of a Vehicle”, Proc. Imeche, Part D: Journal of Automobile Engineering, 233, 11, 2809–2819, 2019

2018 Papers (SCIE)

S. Alkan, A. Ojha, H. Sehitoglu, “Determination of latent hardening response for FeNiCoCrMn for twin-twin interactions”, Acta Materialia, 147, pp. 149-164, 2018.
S. Alkan, A. Ojha, H. Sehitoglu, “The complexity of non-Schmid behavior in the CuZnAl shape memory alloy”, Journal of the Mechanics and Physics of Solids, 114, pp. 238-257, 2018,
Y. Wu, M. Bonisch, S. Alkan, W. Abuzaid, H. Sehitoglu, “Experimental determination of latent hardening coefficients in FeMnNiCoCr”, International Journal of Plasticity, 105, pp. 239-260, 2018.
S. Alkan, Y. Wu, A. Ojha, H. Sehitoglu, Transformation Stress of Shape Memory Alloy CuZnAl: Non-Schmid Behavior, Acta Materialia, 149, 220-234, 2018.
H. Sehitoglu, S. Alkan, Recent Progress on Modeling Slip Deformation in Shape Memory Alloys, Shape Memory and Superelasticity, 4, 11-25, 2018.
Mustafa Sengor, Alp Ozgun, Gulcan Corapcioglu, Mehmet Ipekoglu, Bora Garipcan, Nuri Ersoy, Sabri Altintas, “Core–shell PVA/gelatin nanofibrous scaffolds using co‐solvent, aqueous electrospinning: Toward a green approach”, Journal of Applied Polymer Science, 135(32), pp. 46582, 2018.
Ozerim, Gulcan; Anlas, Gunay; Moumni, Ziad, "On crack tip stress fields in pseudoelastic shape memory alloys” International Journal of Fracture, 212(2), 205-217, 2018
Kamış Y.E., Atalık, K. “Thermomagnetic effects on the stability of Taylor-Couette flow of a ferrofluid in the presence of azimuthal magnetic field”, Journal of Magnetism and Magnetic Materials, 454, 196-206, 2018.
Mercan H., Atalık, K. “Numerical Investigation of Blood Flow Features in intracranial Saccular Aneurysms”, Journal of Thermal Engineering, 4(2), pp.1867-1878, 2018.
Mehmet Guclu Akkoyun, Ercan Balikci, “Precipitate Microstructure as an Indicator of Stress and Temperature Distributions in a Serviced Gas Turbine Blade”, Journal of Engineering Materials and Technology, 140(1), pp. 011001, 2018.
C.T. Yilmaz, H.I. Basturk, “Rejection of sinusoidal disturbances for known LTI systems in the presence of output delay”, Automatica, 92, pp. 41-48, 2018.
Uzal A., F.Ö. Sönmez, F.E. Öz, N. Ersoy, K. Çınar, A composite sandwich plate with a novel core design, Composite Structures, 193, pp.198-211, 2018.
Fatih E Oz, Nuri Ersoy, Mahoor Mehdikhani, Stepan V Lomov, “Multi-instrument in-situ damage monitoring in quasi-isotropic CFRP laminates under tension”, Composite Structures, 196, pp. 163-180, 2018.
Rostampour Fathi Z, Menguc P, Erturk H, " Plasmon coupling between complex gold nanostructures and a dielectric substrate ", Applied Optics, vol.57, is.30, pp.8954-8963, 2018
Ericok OB, and Erturk H, "Optical characterization limits of nanoparticle aggregates at different wavelengths using Approximate Bayesian Computation", Journal of Quantitative Spectroscopy and Radiative Transfer, vol.213, pp.113-118. 2018
Yalcin RA, and Erturk H, “Inverse Design of Spectrally Selective Thickness Sensitive Pigmented Coatings for Solar Thermal Applications", Transactions of ASME Journal of Solar Energy Engineering, vol.140, 031006. 2018
Ericok OB, Cemgil TA, Erturk H, “Approximate Bayesian Computation Techniques for Optical Characterization of Nanoparticle Clusters” Journal of Optical Society of America –A, vol.35, no.1, pp.88-97. 2018.
Baydere, B.A., Talas, S.K., Samur E., “A novel highly-extensible 2-DOF pneumatic actuator for soft robotic applications”, Sensors and Actuators A: Physical, 281, 84-94, 2018.
Atakuru, T., Samur, E., “A robotic gripper for picking up two objects simultaneously”, Mechanism and Machine Theory, 121, 583-597, 2018.
Yarbasi, E.Y., Samur, E., “Design and evaluation of a continuum robot with extendable balloons”, Mechanical Sciences, 9(1), 51-60, 2018.
G. Vardar, W. J. Bowman, Q. Lu, J. Wang, R. J. Chater, A. Aguadero, R. Seibert, J. Terry, A. Hunt, I. Waluyo, D. D. Fong, A. Jarry, E. J. Crumlin, S. L. Hellstrom, Y.-M. Chiang, B. Yildiz, “Structure, Chemistry, and Charge Transfer Resistance of the Interface between Li7La3Zr2O12 Electrolyte and LiCoO2 Cathode” Chem. Mat. 30, 6259-6276 (2018)
Q. Lu, G. Vardar, M. Jansen, S. R. Bishop, I. Waluyo, H. L. Tuller, B. Yildiz, “Surface Defect Chemistry and Electronic Structure of Pr0.1Ce0.9O2-δ Revealed In Operando” Chem. Mat. 30, 2600-2606 (2018)
M.K. Saleem, C. Yilmaz, C. Basdogan, “Psychophysical Evaluation of Change in Friction on an Ultrasonically-Actuated Touchscreen”, IEEE Transactions on Haptics, 11(4), pp. 599 – 610, 2018.

2017 Papers (SCIE)

Ipekoglu, M; Nekouyan, A; Albayrak, O; Altintas, S “Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting”, 32, 599-605, 2017
Zhang, YH; You, YJ; Moumni, Z; Anlas, G; Zhu, JH; Zhang, WH “Experimental and theoretical investigation of the frequency effect on low cycle fatigue of shape memory alloys”, International Journal Of Plasticity, 90, 1-30, 2017
You, YJ; Zhang, YH; Moumni, Z; Anlas, G; Zhang, WH “Effect of the thermomechanical coupling on fatigue crack propagation in NiTi shape memory alloys”, Materials Science And Engineering A structural Materials Properties Microstructure And Processing, 685, 50-56, 2017
Oktav, A; Anlas, G; Yilmaz, C “The effect of the folding rear seat aperture in the acoustic response of a sedan car”, Proceedings Of The Institution Of Mechanical Engineers Part D Journal of Automobile Engineering, 231, 253-266, 2017
Oktav, A; Yilmaz, C; Anlas, G, “Transfer path analysis: Current practice, tradeoffs and consideration of damping”, Mechanical Systems And Signal Processing, 85, 760-772, 2017
Adiguzel, OB; Atalik, K “Magnetic field effects on Newtonian and non-Newtonian ferrofluid flow past a circular cylinder”, Applied Mathematical Modelling, 42, 161-174, 2017\
Kapan, E; Shafaghi, N; Ucar, S; Aydiner, CC “Texture-dependent character of strain heterogeneity in Magnesium AZ31 under reversed loading”, Material Science and Engineering A, 684, 706-711, 2017
Basturk, HI “Observer Based Boundary Control Design for the Suppression of Stick Slip Oscillations in Drilling Systems With Only Surface Measurements” Journal Of Dynamıc Systems Measurement And Control, 139, 104501, 2017
Basturk, HI “Cancellation of unmatched biased sinusoidal disturbances for unknown LTI systems in the presence of state delay”, Automatica, 76, 169-176, 2017
Yildiz, MS; Celik, M “Global Energy Transfer Model of a Microwave Electrothermal Thruster Operating With Helium Propellant at 2.45GHz Frequency”, IEEE Transactions On Plasma Science, 45, 2314-2322, 2017
Kurt, H; Kokal, U; Turan, N; Celik, M “Coaxial-heater hollow cathode”, Review Of Scientific Instruments, 88, 066103, 2017
Yıldız, MS; Celik, M “Numerical investigation of the electric field distribution and the power deposition in the resonant cavity of a microwave-electrothermal thruster”, AIP Advances, 7, 045021, 2017
Oz, FE; Ersoy, N; Lomov, SV “Do high frequency acoustic emission events always represent fibre failure in CFRP laminates?” Composites Part A Applied Science And Manufacturing, 103, 230-235, 2017
Baran, I; Cinar, K; Ersoy, N; Akkerman, R; Hattel, JH “A Review on the Mechanical Modeling of Composite Manufacturing Processes”, Archives Of Computational Methods In Engineering, 24, 365-395, 2017
Ericok, OB; Erturk, H “Inverse characterization of nanoparticle clusters using unpolarized optical scattering without ex-situ measurements”, Journal Of Quantitative Spectroscopy & Radiative Transfer 198, 117-129, 2017
Ilhan, B; Erturk, H “Experimental characterization of laminar forced convection of hBN-water nanofluid in circular Pipe” International Journal Of Heat And Mass Transfer, 111, 500-507, 2017
Moghaddam, ST; Avsar, D; Erturk, H; Menguc, MP “Effect of the probe location on the absorption by an array of gold nanoparticles on a dielectric surface”, Journal Of Quantitative Spectroscopy & Radiative Transfer, 197, 123-131, 2017
Khosroshahi, FK; Erturk, H; Menguc, MP, “Optimization of spectrally selective Si/SiO2 based filters for thermophotovoltaic devices”, Journal Of Quantitative Spectroscopy & Radiative Transfer, 197, 123-131, 2017
Akıner, T; Mason, JK; Ertürk, H “Nanolayering around and thermal resistivity of the water-hexagonal boron nitride interface” The Journal of Chemical Physics, 147(4), 044709 ,2017
Akiner, T; Mason, J; Erturk, H “Thermal characterization assessment of rigid and flexible water models in a nanogap using molecular Dynamics”, Chemıcal Physics Letters, 687, 270-275, 2017
Lutz, FH; Mason, JK; Lazar, EA; MacPherson, RD “Roundness of grains in cellular microstructures”, Physical Review E 96(2), 023001, 2017
Özüpek, Ş; Iyidiker, Ç “Modeling Cracks in Nonlinear Viscoelastic Media Subjected to Thermal Loading” Journal of Propulsion and Power, 33(2), 305-312, 2017
Tunç, B; Özüpek, Ş “Constitutive modeling of solid propellants for three dimensional nonlinear finite element analysis”, Aerospace Science and Technology, 69, 290-297, 2017
Aziziaghdam, M; Samur, E “Real-Time Contact Sensory Feedback for Upper Limb Robotic Prostheses” IEEE/ASME Transactions On Mechatronics 22, 1786-1795, 2017
Ilkhani, G; Aziziaghdam, M; Samur, E “Data-Driven Texture Rendering on an Electrostatic Tactile Display”, International Journal Of Human-computer Interaction, 33, 756-770, 2017
Sonmez, FO “Optimum Design of Composite Structures: A Literature Survey (1969-2009)”, Journal Of Reinforced Plastics And Composites, 36, 3-39, 2017
Ozkaya, E; Yilmaz, C “Effect of eddy current damping on phononic band gaps generated by locally resonant periodic structures”, Journal Of Sound And Vibration, 389, 250-265, 2017
Taniker, S; Yilmaz, C “Generating ultra wide vibration stop bands by a novel inertial amplification mechanism topology with flexure hinges”, International Journal Of Solids And Structures, 106, 129-138, 2017
Oktav, A “The Effects of Trunk Cavity and Air-Gaps in the Acoustic Response of a Passenger Vehicle”, Archives of Acoustics, 42(3), 433-440, 2017
Oktav, A “The Effects Of Secondary Components On The Interior Noise Characteristics Of Automobiles” Journal Of Vibroengineering, 19(6), 4716-4723, 2017

2016 Papers (SCIE)

Albayrak Ö, Ipekoğlu M, Mahmutyazıcıoğlu N, Varmiş M, Kaya E, Altıntaş S, “Preparation and characterization of porous hydroxyapatite pellets: Effects of calcination and sintering on the porous structure and mechanical properties”, Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 230(6), 985-993, 2016
Hazar, Selcuk; Anlas, Gunay; Moumni Ziad "Evaluation of transformation region around crack tip in shape memory alloys." International Journal of Fracture, VL 197, IS 1, pp.99-110, JAN 2016.
Oktav, Akin; Anlas, Gunay; Yilmaz, Cetin "Assessment of vehicle noise variability through structural transfer path analysis." International Journal of Vehicle Design, VL 71, IS 1-4, pp.300-320, 2016.
Haghgouyan, Behrouz; Shafaghi, Nima; Aydiner, C. Can; Anlas, Gunay "Experimental and computational investigation of the effect of phase transformation on fracture parameters of an SMA." Smart Materials and Structures, VL 25, IS 7, JUL 2016.
S. Aidin; L. P. Yousefi; E. Balikci, "Growing Single Crystals with a Low Melt Height and an Axial Vibration", Crystal Growth & Design. Vol. 16, issue:4, pp. 2429-2440, APR 2016
M. Montakhab; M. Bacak; E. Balikci, “Low Melt Height Solidification of Superalloys", etallurgical and Materials Transactions, vol. 47A, issue:6, pp. 3031-3039, JUN 2016
B. M.Selcen, H. Bedir, and A. E. Aksoylu, "Steady state performance analysis of OSR and serial OSR-WGS reactors", Fuel Processing Technology, Volume 152, pp. 240-249, NOV 2016
Jahanbakhsh S., Satir M., Celik M.,"Study of electron current extraction from a radio frequency plasma cathode designed as a neutralizer for ion source applications", Rev Sci Instrum, vol 87(2), Feb 2016.
Umud Esat Ozturk, Lutfi Ucar, Kaveh Shahidi, Nuri Ersoy, Onur Zobi, Umit Bagdat, Rıfat Yanarocak, and Serkan Elmali, "Custom Design Multi-Axial Engine Mount Load-Cell Development for Road Load Identification and Fatigue Life Estimation", SAE International Journal of Materials and Manufacturing, vol. 9 (3), pp. 642-648, AUG 2016
Kenan Çınar and Nuri Ersoy, "3D finite element model for predicting manufacturing distortions of composite parts", Journal of Composite Materials, vol. 50 (27), pp. 3791-3807, NOV 2016
Murat Koc, Fazil O. Sonmez, Nuri Ersoy, and Kenan Cinar, "Failure behavior of composite laminates under four-point bending", Journal of Composite Materials, vol. 50 (26), pp. 3679-3697, NOV 2016
Akıner T., Mason J. K., Ertürk H., 2016, "A new interlayer potential for hexagonal boron nitride", Journal of Physics: Condensed Matter, vol. 28, no. 38.
İlhan B., Kurt M., Ertürk H., 2016, "Experimental investigation of heat transfer enhancement and viscosity change of hBN nanofluids", Experimental Thermal and Fluid Science, vol. 77, pp. 272-283.
Heshmati F, Erturk H, 2016, “Single Phase Models for Improved Estimation of Friction Factor for Laminar Nanofluid Flow in Pipes”, International Journal of Heat and Mass Transfer, vol.95C, pp. 416-425.
Talebi Moghaddan S, Erturk H, Menguc MP, 2016, “Enhancing Local Absorption Patterns within Gold Nano-Structures on a Dielectric Surface under an AFM Probe and with Evanescent-Wave Illumination”, Journal of Quantitative Spectroscopy and Radiative Transfer, vol.178, pp.124-133.
Schweinhart, B, Mason, JK, MacPherson, RD, Topological similarity of random cell complexes and applications, Physical Review E, 93(6), 062111, 2016
Tunc, B.; Ozupek, S., "Implementation and validation of a three dimensional damaging finite strain viscoelastic model", International Journal of Solids and Structures, vol. 102, pp. 275-285 DEC 2016.
Murat Ozturk, Sinem Kocaoglan, and Fazil O. Sonmez, "Concurrent design and process optimization of forging", Computers & Structures, vol. 167, pp. 24-36, APR 2016

2015 Papers (SCIE)

Hazar, Selcuk; Zaki, Wael; Moumni, Ziad; Anlas, Gunay; Modeling Of Steady-State Crack Growth İn Shape Memory Alloys Using A Stationary Method Source: International Journal Of Plasticity Volume: 67 Pages: 26-38 Published: APR 2015
Zharikov, E. V.; Sukhanova, E. A.; Belov, S. D.; Golyshev, V. D.; Balikci, E.; Avetissov, I. Ch.; Combined method of axial low-frequency vibrations and axial heat flux for crystal growth from a melt, DOKLADY PHYSICS Volume: 60 Issue: 3 Pages: 118-121 Published: MAR 2015
H. I. Basturk and M. Krstic, “Adaptive sinusoidal disturbance cancellation for unknown LTI systems despite input delay,” Source: Automatica Volume: 58 Pages: 131-138
Basturk, Halil I.; Rosenthal, Ben; Krstic, Miroslav, Pitch Control Design for Tandem Lifting Body Catamaran by Aft Lifting Body Actuation, IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY Volume: 23 Issue: 2 Pages: 700-707 Published: MAR 2015
Turkoz, Emre; Celik, Murat; AETHER: A simulation platform for inductively coupled plasma JOURNAL OF COMPUTATIONAL PHYSICS Volume: 286 Pages: 87-102 Published: APR 1 2015
Turk, Ugur; Turan, Erhan; Orhan, Mehmet; Ecder, Ali; An Adaptive Time-Stepping Strategy For The Implicit Solution Of Steady Transonic Flow Progress In Computational Fluid Dynamics Volume: 15 Issue: 3 Pages: 135-143
Cinar, Kenan; Ersoy, Nuri, Effect of fibre wrinkling to the spring-in behaviour of L-shaped composite materials, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING Volume: 69 Pages: 105-114 Published: FEB 2015
Mason, J. K.; Lind, J.; Li, S. F.; Reed, B. W.; Kumar, M.; Kinetics and anisotropy of the Monte Carlo model of grain growth, ACTA MATERIALIA Volume: 82 Pages: 155-166 Published: JAN 1 2015
Mason, J. K.; Grain boundary energy and curvature in Monte Carlo and cellular automata simulations of grain boundary motion, ACTA MATERIALIA Volume: 94 Pages: 162-171 Published: AUG 1 2015
Mason, Jeremy K.; Lazar, Emanuel A.; MacPherson, Robert D.; Srolovitz, David J.; Geometric and topological properties of the canonical grain-growth microstructure, PHYSICAL REVIEW E Volume: 92 Issue: 6 Article Number: 063308 Published: DEC 22 2015
Tanlak, Niyazi; Sonmez, Fazil O.; Senaltun, Mahmut, Shape optimization of bumper beams under high-velocity impact loads, ENGINEERING STRUCTURES Volume: 95 Pages: 49-60 Published: JUL 15 2015
Balta, Berna; Sonmez, Fazil O.; Cengiz, Abdulkadir, Experimental identification of the torque losses in V-ribbed belt drives using the response surface method, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING Volume: 229 Issue: 8 Pages: 1070-1082 Published: JUL 2015
Balta, Berna; Sonmez, Fazil O.; Cengiz, Abdulkadir, Speed losses in V-ribbed belt drives, MECHANISM AND MACHINE THEORY Volume: 86 Pages: 1-14 Published: APR 2015
Yuksel, Osman; Yilmaz, Cetin; Shape optimization of phononic band gap structures incorporating inertial amplification mechanisms, JOURNAL OF SOUND AND VIBRATION Volume: 355 Pages: 232-245 Published: OCT 27 2015
Taniker, S.; Yilmaz, C.; Design, analysis and experimental investigation of three-dimensional structures with inertial amplification induced vibration stop bands, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES Volume: 72 Pages: 88-97 Published: OCT 15 2015

2014 Papers (SCIE)

Tuncer, Aydin; Anlas, Gunay; Yilmaz, Yasin An investigation of the effect of weatherstrip seals on vehicle vibration and acoustics using an alternative modeling technique. Source: Journal of Vibration and Acoustics-Transactions of the ASME Volume: 136 Issue: 4 Article Number: 041018 Published: Aug 2014
Goktepe, Sinan; Atalik, Kunt; Erturk, Hakan Comparison of single and two-phase models for nanofluid convection at the entrance of a uniformly heated tube. Source: International Journal of Thermal Sciences Volume: 80 Pages: 83-92 Published: JUN 2014
Aydiner, C. Can; Telemez, M. Ayca Multiscale deformation heterogeneity in twinning magnesium investigated with in situ image correlation. Source: International Journal of Plasticity Volume: 56 Pages: 203-218 Published: MAY 2014
Altincekic, Arun; Balikci, Ercan Precipitate Rafting in a Polycrystalline Superalloy During Compression Creep. Source: Metallurgical and Materials Transactions A-Physical Metallurgy And Materials Science Volume: 45A Issue: 13 Pages: 5923-5936 Published: DEC 2014
Basturk, Halil I.; Krstic, Miroslav State derivative feedback for adaptive cancellation of unmatched disturbances in unknown strict-feedback LTI systems. Source: Automatica Volume: 50 Issue: 10 Pages: 2539-2545 Published: OCT 2014
Turkoz, Emre; Celik, Murat 2-D Electromagnetic and fluid models for inductively coupled plasma for rf ion thruster performance evaluation. Source: IEEE Transactıons on Plasma Science Volume: 42 Issue: 1 Pages: 235-240 Published: JAN 2014
Korkmaz, O.; Celik, M. Global numerical model for the assessment of the effect of geometry and operation conditions on insert and orifice region plasmas of a thermionic hollow cathode electron source. Source: Contributions to Plasma Physics Volume: 54 Issue: 10 Pages: 838-850 Published: NOV 2014
Cinar, Kenan; Ozturk, Umud Esat; Ersoy, Nuri; et al. Modelling manufacturing deformations in corner sections made of composite materials. Source: Journal of Composite Materials Volume: 48 Issue: 7 Pages: 799-813 Published: MAR 2014
Tursun, Murat; Eskinat, Esref H2 optimization of damped-vibration absorbers for suppressing vibrations in beams with constrained minimization. Source: Journal of Vibration and Acoustics-Transactions of the ASME Volume: 136 Issue: 2 Article Number: 021012 Published: APR 2014
Li, S. F.; Mason, J. K.; Lind, J.; et al. Quadruple nodes and grain boundary connectivity in three dimensions. Source: Acta Materialia Volume: 64 Pages: 220-230 Published: FEB 2014
Tanlak, Niyazi; Sonmez, Fazil O. Optimal shape design of thin-walled tubes under high-velocity axial ımpact loads. Source: Thin-Walled Structures Volume: 84 Pages: 302-312 Published: Nov 2014
Ertas, Ahmet H.; Sonmez, Fazil O. Design optimization of fiber-reinforced laminates for maximum fatigue life. Source: Journal of Composite Materials Volume: 48 Issue: 20 Pages: 2493-2503 Published: Aug 2014
Yuksel, Osman; Yilmaz, Cetin, Active noise control in a duct with flow. Source: Journal of Dynamic Systems Measurement and Control-Transactions of the ASME Volume:136 Issue: 3 Article Number: 031014 Published: MAY 2014

2013 Papers (SCIE)

Altintas, S; Mahmutyazicioglu, Nazim; Albayrak, Onder; Ipekoglu, Mehmet; Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams Source: Journal Of Materials Research Volume: 28 Issue: 17 Pages: 2509-2519 Published: SEP 2013
Aydiner, C. Can; Prime, Michael B. Three-Dimensional Constraint Effects on the Slitting Method for Measuring Residual Stress. Source: Journal Of Engıneerıng Materıals And Technology-Transactıons Of The Asme Volume: 135 Issue: 3 Article Number: 031006 Published: JUL 2013
Altincekic, Arun; Balikci, E. Precipitate Size in the Superalloy IN738LC During Compression Creep. Source: Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science Volume: 44A Issue: 6 Pages: 2487-2498 Published: JUN 2013
Balikci, Ercan; Dario, Aidin; Sicim, Hasan Ozgen; Single crystal growth of germanium - silicon alloys. Source: Journal Of Optoelectronics And Advanced Materials Volume: 15 Issue: 1-2 Pages: 25-30 Published: JAN-FEB 2013
Danis, M. E.; Orhan, M.; Ecder, A. 2. ISPH modelling of transient natural convection. Source: International Journal Of Computational Fluid Dynamics Volume: 27 Issue: 1 Pages: 15-31 Published: JAN 1 2013
Scherer, Carsten W.; Kose, I. Emre From transfer matrices to realizations: Convergence properties and parametrization of robustness analysis conditions. Source: Systems & Control Letters Volume: 62 Issue: 8 Pages: 632-642 Published: AUG 2013
Lazar, Emanuel A.; Mason, Jeremy K.; MacPherson, Robert D.; Statistical topology of three-dimensional Poisson-Voronoi cells and cell boundary networks. Source: Physical Review E Volume: 88 Issue: 6 Article Number: 063309. Published: DEC 20 2013
Mason, Jeremy K.; Johnson, Oliver K. Convergence of the hyperspherical harmonic expansion for crystallographic texture. Source: Journal Of Applied Crystallography Volume: 46 Pages:1722-1728 Part: 6. Published: DEC 2013
Mason, Jeremy K.; Johnson, Oliver K.; Reed, Bryan W.; et al. Statistics of twin-related domains and the grain boundary network. Source: Acta Materialia Volume: 61 Issue: 17 Pages: 6524-6532 Published: OCT 2013
Acar, M. A.; Yilmaz, C. Design of an adaptive-passive dynamic vibration absorber composed of a string-mass system equipped with negative stiffness tension adjusting mechanism. Source: Journal of Sound and Vibration Volume: 332 Issue:2 Pages: 231-245 Published: JAN 21 2013
Taniker, S.; Yilmaz, C. Phononic gaps induced by inertial amplification in BCC and FCC lattices. Source: Physics Letters A Volume: 377 Issue: 31-33 Pages: 1930-1936 Published: OCT 30 2013
Acar, G.; Yilmaz, C. Experimental and numerical evidence for the existence of wide and deep phononic gaps induced by inertial amplification in two-dimensional solid structures. Source: Journal of Sound and Vibration Volume: 332 Issue: 24 Pages: 6389-6404 Published: NOV 25 2013

2012 Papers (SCIE)

A.Oral, G. Anlas, J. Lambros, Determination of Gurson-Tvergaard-Needleman Model Parameters for Failure of a Polymeric Material Source: Internatıonal Journal Of Damage Mechanics Volume: 21 Issue: 1 Pages: 3-25 DOI: 10.1177/1056789510385261 Published: JAN 2012
E. Hasret, M. Ipekoglu, S. Altintas, Microwave-assisted synthesis of hydroxyapatite for the removal of lead(II) from aqueous solutions Source: Environmental Science And Pollution Research Volume: 19 Issue:7 Pages: 2766-2775 DOI: 10.1007/s11356-012-0776-5 Published: AUG 2012
R. Kayikci, F. O. Sonmez, Design of composite laminates for optimum frequency response Source: Journal Of Sound And Vibration Volume: 331 Issue: 8 Pages: 1759-1776 DOI: 10.1016/j.jsv.2011.12.020 Published: APR 9 2012
A.Dario, H. O. Sicim, E. Balikci, A comparative study on the growth of germanium-silicon single crystals grown by the vertical Bridgman and axial heat processing techniques Source: Journal Of Crystal Growth Volume: 351 Issue: 1 Pages: 1-8 DOI:10.1016/j.jcrysgro.2012.04.008 Published: JUL 15 2012
S. Ozupek, U. C. Unlu Viscoelastic analysis of a dental metal-ceramic system Source: Mechanics Of Time-Dependent Materials Volume: 16 Issue: 4 Pages: 427-437 DOI: 10.1007/s11043-012-9170-4 Published: NOV 2012
H. Mercan, K. Atalik, Isothermal and non-isothermal viscoelastic flow of PTT fluid in lid-driven polar cavity Source: Korea-Australia Rheology Journal Volume: 24 Issue: 4 Pages: 277-286 DOI: 10.1007/s13367-012-0034-x Published: DEC 2012
E. Samur, L. Flaction, H. Bleuler Design And Evaluation Of A Novel Haptic Interface For Endoscopic Simulation Source: Ieee Transactions On Haptics Volume: 5 Issue: 4 Pages: 301-311 Doı: 10.1109/Toh.2011.70 Published: Oct-Dec 2012
L. Santos-Carreras, K. Leuenberger, E. Samur, Tactile Feedback Improves Performance in a Palpation Task: Results in a VR-Based Testbed Source: Presence-Teleoperators And Virtual Environments Volume: 21 Issue: 4 Pages: 435-451 Published: FALL 2012
Scherer, Carsten W.; Kose, I. Emre Gain-Scheduled Control Synthesis Using Dynamic D-Scales Source: Ieee Transactıons On Automatıc Control Volume: 57 Issue: 9 Pages: 2219-2234 Doı: 10.1109/Tac.2012.2184609 Published: Sep 2012
Veenman, Joost; Scherer, Carsten W.; Kose, I. Emre Robust Estimation With Partial Gain-Scheduling Through Convex Optimization Source: Control Of Lınear Parameter Varyıng Systems Wıth Applıcatıons Pages: 253-278 Doı: 10.1007/978-1-4614-1833-7_10 Published: 2012

2011 Papers (SCIE)

U.E. Ozturk; G. Anlaş, Hydrostatic compression of anisotropic low density polymeric foams under multiple loadings and unloadings, Polymer Testing, vol. 30, issue: 7, pp. 737-742, 2011
V. Alkan; S.M. Karamihas; G. Anlaş., Finite element modeling of static tire enveloping characteristics, International Journal of Automotive Technology, vol. 12, issue 4, pp. 529-535, 2011
U.E. Ozturk; G. Anlaş, Finite element analysis of expanded polystyrene foam under multiple compressive loading and unloading, Materials & Design, vol. 32, issue: 2, pp. 773-780, 2011
S.C. Baslamisli, I.E. Kose, G. Anlaş, Handling stability improvement through robust active front steering and active differential control, Vehicle System Dynamics, vol.49, issue:5, pp. 657-683, 2011
K. Atalik; U. Sonmezler, Heat transfer enhancement for boundary layer flow over a wedge by the use of electric fields, Applied Mathematical Modeling, vol. 35, issue. 9 pp. 4516-4525, 2011
H. Mercan; K. Atalik, Flow structure for Power-Law fluids in lid-driven arc-shape cavities, Korea-Australia Rheology Journal, vol. 23, issue:2, pp. 71-80, 2011
E. Turan; A. Ecder, Analysis of a bimetallic slab in non-isothermal flow, Proceedings of the Institution of Mechanical Engineers Part C – Journal of Mechanical Engineering Science, vol. 255, issue: C3, pp. 658-672, 2011
A. Dario, H.O. Sicim, E. Balikci , A new approach for dopant distribution and morphological stability in crystals grown by the axial heat processing (AHP) technique, Journal of Crystal Growth, vol.337, issue:1, pp. 65-71, 2011
E. Balikci; O. Yaman, Investigation on liquid bath nitriding of selected steels, Surface Engineering, vol.27, issue:8, pp. 609-615, 2011
A. Dario, H.O. Sicim, E. Balikci, Germanium-silicon single crystal growth by the axial heat processing (AHP) technique, Journal of Crystal Growth, vol. 318, issue:1, pp. 1057-1061, 2011
M. Çelik, Spectral measurements of inductively coupled and helicon discharge modes of a laboratory argon plasma source, Spectrochimica Acta Part B – Atomic Spectroscopy, vol. 66, issue:2, pp.149-155, 2011
H. Ertürk, Evaluation of image reconstruction algorithms for non-destructive characterization of thermal interfaces, International Journal of Thermal Sciences, vol. 50, issue:6, pp. 906-917, 2011
H.C. Yıldırım, Ş. Özüpek, Structural assessment of a solid propellant rocket motor: Effects of aging and damage, Aerospace Science and Technology, vol. 15, issue:8, pp. 635-641, 2011
Akbulut M. ve F.Ö. Sönmez, Design optimization of laminated composites using a new variant of simulated annealing, Computers and Structures, Eylül 2011, 89: 1712–1724.
Tanlak N., F.Ö. Sönmez ve E. Talay, Detailed and simplified models of bolted joints under impact loading, The Journal of Strain Analysis for Engineering Design, Nisan 2011, 46: 1-13.
Ertaş A.H. ve F.Ö. Sönmez, Design optimization of spot-welded plates for maximum fatigue life, Finite Elements in Analysis and Design, Nisan 2011(a), 47(4): 413-423.
Ertaş A.H. ve F.Ö. Sönmez, Design optimization of composite structures for maximum strength using direct simulated annealing, Proc. IMechE, Part C: Journal of Mechanical Engineering Science, Ocak 2011(b), 225(1): 28-39.

2010 Papers (SCIE)

Ipekoglu, M., Altintas, S., “Silver Substituted Nanosized Calcium Deficient Hydroxyapatite”, Materials Technology, Volume: 25, Issue: 5, Pages: 295-301, 2010.
Albayrak, O., Altintas, S., “Production of ‘Tricalcium Phosphate/Titanium Dioxide’ Coating Surface on Titanium Substrates”, Journal of Materials Science & Technology, Volume: 6, Issue: 11, Pages: 1006-1010, 2010.
Alaca, B.E., Ozcan, C. and Anlas, G ., “Deterministic assembly of channeling cracks as a tool for nanofabrication”, Nanotechnology, Vol. 21, No. 5, Art. No. 055301, 2010.
Kaptan Y; Ecder A; Atalik K, Rotating-surface-driven non-newtonian flow in a cylindrical enclosure, korea-australia rheology journal volume: 22 issue: 4 pages: 265-272 published: dec 2010.
Balikci E. and D. Erdeniz: “Multimodal Precipitation in the Superalloy IN738LC”, Metallurgical and Materials Transactions A, volume 41A, June 2010, pp. 1391-1398.
Celik, M., Batishchev O. and Martinez-Sanchez M., “Use of emission spectroscopy for real-time assessment of relative wall erosion rate of BHT-200 hall thruster for various regimes of operation”, Vacuum, Vol. 84, No. 9, pp.1085-1091, 2010.
Kaptan Y., Ecder A. and Atalik K. "Rotating-Surface-Driven Non-Newtonian Flow in a Cylindrical Enclosure", Korea-Australia Rheology Journal, 22(4), 265-272 (2010).
Turan E., Basol A. M., Saygin H. and Ecder A. "Resolving Non-Symmetry in Flows via Subdomain Shifts ", Mathematical Modelling and Analysis, 15(3) :349-370 (2010).
Ersoy N; Garstka Tomasz; Potter Kevin; et al. ’Development of the properties of a carbon fibre reinforced thermosetting composite through cure’ Composites Part A-Applied Science And Manufacturing Volume: 41 Issue: 3 Pages: 401-409 DOI: 10.1016/j.compositesa.2009.11.007 Published: MAR 2010
Ersoy N; Garstka Tomasz; Potter Kevin; et al. ‘Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite’ Composites Part A-Applied Science And Manufacturing Volume: 41 Issue: 3 Pages: 410-418 DOI: 10.1016/j.compositesa.2009.11.008 Published: MAR 2010
Ersoy N; Tugutlu Mehmet ‘Cure Kinetics Modeling and Cure Shrinkage Behavior of a Thermosetting Composite’ Polymer Engineering And Science Volume: 50 Issue: 1 Pages: 84-92 DOI: 10.1002/pen.21514 Published: JAN 2010
Erturk, H. and Howell, J. R., 2010, “Efficient Signal Transport Model for Remote Thermometry in Full Scale Systems”, IEEE Transactions on Semiconductor Manufacturing, vol.23, no.1., pp.132-140. (SCI)
Özüpek, Ş., "Computational Procedure for the Life Assessment of Solid Rocket Motors", Journal of Spacecraft and Rockets, Vol.47, pp.639-648, 2010. doi: 10.2514/1.46801
Yilmaz Ç., G. M. Hulbert, “Theory of phononic gaps induced by inertial amplification in finite structures”, Physics Letters A, vol. 374, no. 34, pp. 3576–3584, 2010.

2009 Papers (SCIE)

Alkan, V., Karamihas, S. M. and Anlas, G., “Experimental Analysis of Tyre Enveloping Characteristics at Low Speed”, Vehicle System Dynamics, Vol. 47, No. 5, pp. 575-587, 2009.
Ozturk, U. E. and Anlas, G., “Energy Absorption Calculations in Multiple Compressive Loading of Polymeric Foams”, Materials & Design, Vol. 30, No. 1, pp. 15-22, 2009.
Yasin, Y. and Anlas, G., “An Investigation of the Effect of Counterweight Configuration on Main Bearing Load and Crankshaft Bending Stress”, Advances in Engineering Softwares, Vol. 40, No. 2, pp. 95-104, 2009.
Baslamisli, S. C., Kose, I. E. and Anlas, G., “Gain-scheduled Integrated Active Steering and Differential Control for Vehicle Handling Improvement”, Vehicle System Dynamics, Vol. 47, No. 1, pp. 99-119, 2009.
İ. E. Köse and C. W. Scherer, “Robust L2-Gain Feedforward Control of Uncertain Systems using Dynamic IQCs”, International Journal of Robust and Nonlinear Control, Vol. 19, pp. 1224-1247, 2009.
Gürsev Pirge, Abdurrahman Hacioğlu, Murat Ermiş, Sabri Altintaş, Determination of the Compositions of NiMnGa Magnetic Shape Memory Alloys Using Hybrid Evolutionary Algorithms, Computational Materials Science, 45, 1, 189-193, March 2009, SCI.
Tolga Y. Sunay, Mümin Şahin, Sabri Altintaş, The Effects Of Casting And Forging Processes On Joint Properties In Friction-Welded AISI 1050 and AISI 304 Steels, International Journal of Advanced Manufacturing Technology, 44, 1-2, 68-79, September 2009, SCI-E.
Sönmez F.Ö., “Optimal shape design of shoulder fillets for flat and round bars under various loadings,” Proc. IMechE, Part C: Journal of Mechanical Engineering Science, Eylül 2009, 223(C8): 1741-1754, SCI.
Ertaş A.H. ve F.Ö. Sönmez, “Optimization of spot-weld joints,” Proc. IMechE, Part C: Journal of Mechanical Engineering Science, Mart 2009, 223(C3): 545-555, SCI.
Tümer H. ve F.Ö. Sönmez, “Optimum shape design of die and preform for improved hardness distribution in cold forged parts,” Journal of Materials Processing Technology, Şubat 2009, 209(3):1538-1549, SCIE.
Ertaş A.H., Ö. Vardar, F.Ö. Sönmez ve Z. Solim, “Measurement and assessment of fatigue life of spot-weld joints,” Transactions of ASME; Journal of Engineering Materials and Technology, Ocak 2009, 131(1):011011, SCI.
Kaptan Y., Ecder A. and Atalık K. "Computational Parametric Analysis of Rotating Surface Flow", IMechE Part C: J. Mechanical Engineering Science, 223, 889-899 (2009). SCI
H. Mercan, K. Atalık, Vortex formation in lid-driven arc-shape cavity flows at high Reynolds numbers, European Journal of Mechanics B-Fluids, 28, 1, 61-71, 2009. SCI.
K. Atalık, Ü. Sönmezler, Symmetry groups and similarity analysis for boundary layer control over a wedge using electric forces, Int. J. of Nonlinear Mechanics, 44, 883-890, 2009. SCI.
C. C. Aydıner, J. V. Bernier, B. Clausen, U. Lienert, C. N. Tome, and D. W. Brown, “Evolution of stress in individual grains and twins in a magnesium alloy aggregate,” Physical Review B, 80(2) , 024113 2009. SCI
C. C. Aydıner, D. W. Brown, N. A. Mara, J. Almer, and A. Misra, “In situ x-ray investigation of freestanding nanoscale Cu-Nb multilayers under tensile load,” Applied Physics Letters, 94(3), 031906 2009. SCI
Dinc Erdeniz, Ercan Balikci: “Precipitate Formation and Evolution in the Superalloy IN738LC” Rare Metal Materials and Engineering, volume 38, suppl. 3, December 2009, pp. 142-146. SCIE

2008 Papers (SCIE)

Oral A, Lambros j, Anlas G, “Crack initiation in functionally graded materials under mixed mode loading: Experiments and simulations, JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME Volume: 75 Issue: 5 Article Number: 051110 Published: SEP 2008 (SCI)
C. W. Scherer and İ. E. Köse, “Robustness with dynamic IQCs: An exact state-space characterization of nominal stability with applications to robust estimation”, Automatica, Vol. 44, No. 7, pp. 1666-1675, 2008 (SCI)
M. Güney, E. Eskinat, Optimal Actuator and Sensor Placement in Flexible Structures using Closed-loop Criteria. Journal of Sound and Vibration, 2008 Vol. 312, No: 1-2, pp. 210 – 233 (SCI)
M.Tursun, E.Eskinat, Suppression of vibration using passive receptance method with constrained minimization, Shock and Vibration, 2008 Vol. 15 No:6, pp.639-654 (SCI)
Kunt Atalık, Group theoretical analysis and similarity solutions for stress boundary layers in viscoelastic flows, JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 153 (1), 62-71, 2008 (SCI)
Erturk, H., Gamba, M., Ezekoye, O.A., and Howell, J.R., February 2008, “Validation of Inverse Boundary Condition Design in a Thermometry Test Bed”, Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 109, pp.317-326 (SCI)
K. Dwarapureddy, Ercan Balikci, S. Ibekwe, and A. Raman: “Activation energy for growth in single size distribution and the dissolution features of ?' precipitates in the superalloy IN738LC” Journal of Materials Science, March 2008, pp. 1802- 1810 (SCI)
Ercan Balikci, and A. Raman: “The Relationship between activation energy and precipitate size for precipitate agglomeration”, Journal of Materials Science, volume 43, February 2008, pp. 927-932 (SCI)
Kaptan Y., Buyruk E., and Ecder A., "Numerical Investigation of Fouling Heat Exchanger Tubes with Conjugated Heat Transfer Approach", International Communications in Heat and Mass Transfer, 35, 1153-1158, 2008 (SCI)
Akbulut A. ve F.Ö. Sönmez, “Optimum design of composite laminates for minimum thickness,” Computers & Structures, Kasım 2008, 86: 1974–1982 (SCI)
Ertaş A.H., F.Ö. Sönmez, “A parametric study on fatigue strength of spot weld joints,” Fatigue & Fracture of Engineering Materials & Structures, 31: 766–776, Eylül 2008, (SCI)
C. Bagcioglu, Es Altuntas, Sinan Sen, M. B. Islier, O. G Ersoy, N. Ersoy, T. Nugay, and N. Nugay, "Exfoliation targeted toughness enhancement in polypropylene-blend-montmorillonite nanocomposites," Polymer International, 57:1395–1403 December 2008 (SCI)
Ihsan Efeoglu, Özlem Baran, Fatih Yetim, Sabri Altıntaş: “Tribological characteristics of MoS2–Nb solid lubricant film in different tribo-test “, Surface & Coatings Technology 203 (2008) 766–770 (SCI)
Önder Albayrak, Osman El-Atwani, Sabri Altıntaş: “Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: Effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition”, Surface & Coatings Technology, 202 (2008) 2482 -2487 (SCI)

2007 Papers (SCIE)

İlhan Polat, Eşref Eşkinat and İ. Emre Köse, "Dynamic Output Feedback Control of Quasi-LPV Mechanical Systems", IET Control Theory & Applications, Vol. 1, No. 4, 2007, SCI
Baslamisli, S. Caglar., Kose, I. Emre, Anlas, G., "Robust Control of Anti-lock Brake System", Vehicle System Dynamics 45 (3): 217-232 MAR 2007, SCI
Öztürk, U. Esat, Anlaş, Gunay, "Multiple compressive loading and unloading behavior of polymeric foams", Journal of Polymer Engineering, Volume: 27 Issue: 8 Pages: 607-619 Published: 2007, SCI
Orhan, M., Ecder, A. and Tezel, A., "Stability of Thermal Transpiration Flows in Rectangular Enclosures - Axisymmetric disturbances", International Communications in Heat and Mass Transfer, 34, 83-92 (2007), SCI
Ilicak M., Ecder, A., and Turan, E.,, "Operator Splitting Techniques for the Numerical Analysis of Natural Convection Heat Transfer", International Journal of Computer Mathematics, 84:6, 783-793 (2007), SCI
Orhan, M., Ecder A. and Tezel A., "Thermal Creep Flow of Rarefied Gases in Rectangular Enclosures; A Comparison between the Navier-Stokes and Burnett Models", Progress in Computational Fluid Dynamics, v 7, n 7, 404-413 (2007), SCI
A. Deal, Ercan Balikci, and R. Abbaschian "Enhanced Morphological Stability in Sb-Doped Ge", Metal-lurgical and Materials Transactions A, volume 38A, January 2007, pp. 100-115. SCI
Sönmez, F.Ö. and M. Akbulut, "Process Optimization of Tape Placement for Thermoplastic Composites," Composites Part A-Applied Science and Manufacturing, 38: 2013-2023, 2007, SCI.
Sönmez, F.Ö. and A. Demir, "Analytical Relations between Hardness and Strain for Cold Formed Parts," Journal of Materials Processing Technology, 186: 163-173, 2007, SCI
Sönmez, F.Ö., "Shape Optimization of 2D Structures Using Simulated Annealing" Computer Methods in Applied Mechanics and Engineering, 196: 3279-3299, 2007, SCI.
Guney, M., Eskinat, E., "Modeling of multilayered piezoelectric transducers with ultrasonic welding application", Smart Materials and Strucures. 2007 Vol. 16 pp. 541-554, SCI
A. Ök, Ş. Ozupek, E.B. Becker, "Crack simulation in pneumatic tyres using the finite element method", Journal of Automobile Engineering, 221, 2, 157-166, 2007, SCI
Wisnom MR, Potter KD, Ersoy N, "Shear-lag analysis of the effect of thickness on spring-in of curved composites" Journal of Composite Materials 41 (11): 1311-1324 JUN 2007, SCI
Garstka, T; Ersoy, N; Potter, KD, et al., "In situ measurements of through-the-thickness strains during processing of AS4/8552 composite," Composites Part A-Applied Science And Manufacturing, 38:: 2517-2526 (2007), SCI
Onder Albayrak, Cinar Oncel, Mustafa Tefek, Sabri Altintas, "Effects of Calcination on Electrophoretic Deposition of Naturally Derived and Chemically Synthesized Hydroxyapatite", Reviews on Advanced Materials Science, 15 (2007) 10-15, SCI
Ecder A. and Unsal R., "Multiple-Domain Analysis of Combustion of a Spherical Fuel Droplet", International Journal for Computational Methods in Engineering Science and Mechanics, 8:103-106 (2007).

2006 Papers (SCIE)

Ö Yıldız, Bedir, H., “A parallel solution to the radiative transport in three dimensional participating media”, NUMERICAL HEAT TRANSFER PART B, FUNDAMENTALS, 50:79-95, 2006 (SCI)
Wisnom, MR; Gigliotti, M; Ersoy, N; et al. “Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures” COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 37 (4): 522-529 2006 (SCI)
Ullum U., Wright J., Dayi O., Ecder, A., Soulaïmani A., Piche R. and Kamath H., "Reduction of Rotating Stall within an Impeller of a Centrifugal Pump Based upon Measured Pressure and Velocity Data", JOURNAL OF PHYSICS (CS), Volume 52, pp. 36-45, 2006.

2005 Papers (SCIE)

Oral A, Anlas G, “Effects of Radially Varying Moduli on Stress Distribution of Nonhomogeneous Anisotropic Cylindrical Bodies” INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 42 (20): 5568-5588 OCT 2005
Erdal, O. and Sönmez F.O., “Optimum Design of Composite Laminates for Maximum Buckling Load Capacity Using Simulated Annealing,” Composite Structures, 2005, 71:45-52.
Ersoy N, Potter K, Wisnom MR, et al. Development of spring-in angle during cure of a thermosetting composite COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 36 (12): 1700-1706 2005
Ersoy N, Potter K, Wisnom MR, et al. An experimental method to study the frictional processes during composites manufacturing COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING 36 (11): 1536-1544 2005
Özüpek, Ş. and E. B. Becker, "Finite Element Method for the Study of Belt Edge Delaminations in Truck Tires", Rubber Chemistry and Technology, Vol.78, pp.557-571 2005.
Özüpek, Ş. and H. Cao, "The Effect of Anisotropy on Bovine Pericardial Tissue with Stress Concentration", Journal of Mechanics in Medicine and Biology, Vol.5, pp.397-413, 2005.

2004 Papers (SCIE)

Faryar Jabbari, İ. Emre Köse, Rate- and Magnitude Bounded Actuators: Scheduled Output Feedback Design, International Journal of Robust and Nonlinear Control, Vol. 14, No. 13-14, pp. 1169-1184, 2004.
Celik,C.E., Vardar, Ö. and Kalenderoglu,V.;Comparison of Retardation Behavior of 2024 T3 and 7075-T6 Al- alloys; Fatigue Fracture Engng Mater Struct Vol.27, pp 713-722, 2004
Örs, H., “Oil Transport in the Turkish Straits System, Part II: Simulation of the Contamination in the Dardanelles Strait”, Energy Sources (SCI) Vol. 26, No. 2, Ocak 16, 2004, pp.167-175.
Örs, H., S. L.Yılmaz, “Modélisation par Elements Finis de la Dissémination dans le détroit d’Istanbul”, La Houille Blanche (SCI), 2004, Vol. I, pp. 78-82.
Örs, H., S. L.Yılmaz, “A Stochastic Approach to the Modelling of Oil Pollution”, Energy Sources (SCI) Vol. 26, No. 9, Temmuz 16, 2004, pp. 879-884.
Atalık K., Keunings R., On the occurrence of even harmonics in the shear stress response of viscoelastic fluids in large amplitude oscillatory shear, Journal of Non-Newtonian Fluid Mechanics, 122(1-3), 107-116, 2004 (SCI).
Demir, A. and F.Ö. Sönmez, “Prediction of Brinell Hardness Distribution in Cold-Formed Parts,” Transactions of ASME; Journal of Engineering Materials Technology, October 2004, 126: 398-405.
Orbak Y. ,E. Eskinat, Türkay O. Effect of Physical Parameters on System Eigenvalues and its Use in Physical Model Reduction, Journal of the Franklin Institute, vol. 341, November 2004, pp. 613-655
A.Esin, N. Mahmutyazıcıoğlu, S. Altıntaş, “Drying and Sintering of Ceramic Based Parts Using Microwave Heating”, Key Engineering Materials, 264-269, 731-734, 2004.
Ş. Gören, H. Gökbayrak , S. Altıntaş, “Production of Hydroxylapatite From Animal Bone”, Key Engineering Materials, 264-269, 1949-1952, 2004.
D. Nural, S. Altıntaş, “Investigations on Depth of Regions of Cut Surfaces Generated with Abrasive Waterjets”, Key Engineering Materials, 264-269, 969-952, 2004.
A. S. Onay, S. Altıntaş, “ Effects of Sintering Parameters on Initial Magnetic Permeability of Ni-Zn Ferrite”, Key Engineering Materials, 264-269, 1277-1280, 2004.
G. Pirge, C.V. Hyatt, S. Altıntaş, “Characterization of NiMnGa magnetic shape memory alloys”, J. Materials Processing Technology, 155-156, 1266-1272, 2004.
Ersoy, N., Potter, K., Clegg, M., and Wisnom, M. R., Development of Spring-In Angle During Cure of a Thermosetting Composite, accepted by Composites A, 2004
Ersoy, N., Potter, K., Clegg, M., and Wisnom, M. R., An Experimental Method to Study the Frictional Processes During Composites Manufacturing, accepted by Composites A, 2004
M. R. Wisnom, M. Gigliotti, N. Ersoy, M. Campbell and K. D. Potter, Mechanisms Generating Residual Stresses and Distortion during Manufacture of Polymer Matrix Components, accepted by Composites A, 2004

2003 Papers (SCIE)

Heper, R. and Vardar, Ö. “Elastic-plastic material response of fatigue crack surface profiles due to overload interactions” International Journal of Fatigue, 25 (2003) 801-810
Shi, J., Savaş, M. A., Yang, B. J. and Smith, *R. W. “Spheroidal graphite ferritic cast iron-an ideal model material to examine the deformation a single phase matrix containing soft-spheroidal inclusions” International J. of Cast Metals Research 2003 Vol. 16 Nos. 1-3 215
Köse, İ. E., Jabbari, F “Scheduled controllers for linear systems with bounded actuators” automatica 39 (8): 1377-1387 AUG 2003
Yılmaz, S. L. and Örs, H., “Oil Transport in the Turkish Straits System: Simulation of the Contamination in the Istanbul Strait” Energy Sources (SCI), Volume 25, Number 11, November 2003
Eşkinat, E. “Dynamic Consistency Relations for Process Modeling” AIChE Journal, August 2003, pp. 2224-2227.
Orbak, Y., Türkay, O. S., Eşkinat, E., “Youcef -Toumi, Model Reduction in the Physical Domain” Proc. IMechE, Vol. 217 Part I: J Systems and Control Engineering, December 2003 pp. 481-496

2002 Papers (SCIE)

Anlas, G., Santare, M. H. ve Lambros J., “Dominance of Asymptotic Crack Tip Fields in Elastic Functionality Graded Materials”, International Journal of Fracture, 115, (2), 193-204, 2002. (SCI)
Anlas, G. and Elbeyli, O., “The Nonlinear Vibrations of a Simply Supported Rectangular Metallic Plate Subject to Transverse Harmonic Excitation in the Presence of a One-to-One Internal Resonance”, Nonlinear Dynamics, 30, 1-28, 2002. (SCI)
Köse, İ. E., “IQC-Based L2-Control of Linear Periodic Systems”, Systems and Control Letters, 47, (3), 199-209, 2002. (SCI)
M. A. Savas, B. J. Yang, R. W. Smith, Diffusion couple preparation using cast coating technique, Journal of Materials Science, 37, 4093-4099, 2002.
J. Shi, M. A. Savas, R. W. Smith, Plastic Deformation of a Model Material Containing Soft Spheroidal Inclusions: Spheroidal Graphite Cast Iron, Journal of Materials Processing Technology, 6442, 1-7, 2002. (SCI)
Çolak, Z.S, F.Ö. Sönmez and V. Kalenderoğlu, “Process Modeling And Optimization of Resistance Welding for Thermoplastic Composites, Journal of Composite Materials, 36(6): 721-744, March 2002. (SCI)
Sönmez F.Ö. and E. Eyol, “Optimal Post-Manufacturing Cooling Paths for Thermoplastic Composites”, Composites Part A-Applied Science and Manufacturing, 33(3): 301-314, March 2002. (SCI)
Sönmez F.Ö., H.T. Hahn and M. Akbulut, “Analysis of Process-Induced Residual Stresses in Tape Placement,” Journal of Thermoplastic Composite Materials, 15(6): 525-544, November 2002. (SCI)

2001 Papers (SCIE)

Anlaş, G. and Göker, G., “Vibration Analysis of Skew Fiber-Reinforced Composite Laminated Plates”, Journal of Sound and Vibration, Vol. 242, No. 2, pp. 265-276, April 2001.
Anlaş, G. And Tüzer, Ö., “Design of Laminated Composite Plates Containing a Hole Under in-Plane Loadings”, Journal of Reinforced Plastics and Composites, Vol. 20, No. 12, pp. 1024-1035, August 2001
Ecder, A. “Partitioning Strategies for Parallel Domain Decomposition in Modelling Transport Phenomena", Progress in Computational Fluid Dynamics, Volume 1, Number 4, pp. 188-193, 2001.

2000 Papers (SCIE)

Şafak, K. K. and Türkay, O. S., “Experimental Identification of a Universal Motor Dynamics Using Neural Networks”, Mechatronics, Vol. 10, No. 8, pp.881-896, 2000
Ersoy, N. and Vardar, Ö., “Measurement of Residual Sresses in Layered Composites”, J.of Composite Materials, Vol. 34, No 7, pp. 575-598, April 2000
Anlaş, G. Santare M.H., Lambros J., “Numerical Calculation of Stress Intensity Factors in Functionally Graded Materials”, Int. Journal of Fracture Vol. 104, pp. 131-143. July 2000
Elbeyli, Ö and Anlaş, G., “The Nonlinear Response of simply supporled Pectanpular Metallic Plate to Transverse Harmonic Excitation Journal of Applied Mechanics”, Vol. 67, No. 3, pp. 621-626,. 2000
Frate F. C., Bedir, H., Sung CJ, T’ien JS, “On flammability limits of dry CO/O2 Opposed-Jet Diffusion Flames”, Proceedings of the Combustion Institute, Volume 28, pp. 2047-2054, 2000

1999 Papers (SCIE)

Lambros, j., Narayanaswamy, A., Santare, M. H., Anlaş, G., “Manufacture and testing of a functionally graded material”, Journal of Engineering Materials and Technology Transactions of the ASME”, Vol. 121, No. 4, pp. 488-493, 1999.
Anlaş, G., “Effect of Two-to-One Internal in a Nonlinearly Restrained Fluid Valve”, Journal of Vibration and Acoustics, Vol. 121, No.1,pp. 59-63, 1999
Ardic, S., Anlaş, G. and Eraslanoğlu, G., “Failure Prediction for Laminated Composites Under Multiaxaial Loading”, Journal of Reinforced Plastics and Composites, Vol. 18, No.2, pp. 138-150, 1999
Kayran A. and Anlaş, G., “Effect of Stacking Sequence on Free Vibration Frequencies of Laminated Composite Circular Cylindrical Shells”, Journal of Vibration and Control, Vol.5, No. 3, pp. 355-375, 1999
Köse, İ. E. and Jabbari, F., “Robust Control of Lincar Systems with Real Parametric -Uncertainties”, Automatica, Vol. 35, Ro. 4, pp.679-687, 1999
Köse, İ. E. and Jabbari, F., “Control or LPV Systems with Partly-Measured Parameters” IEEE Transactions on Automatic Control, Vol. 44. No.3.pp.658-664,1999
Shih, h. Y., Bedir, H., James S.T’ien , Chih-Jen Sung, “Computed Flammability Limits of Opposed Jet H2/02/C02 Diffusion Flames At Pressure”, J. Of Propulsion &Power 15,6,pp. 903-908, 1999
Ekici, B. and Altıntaş, S., "Surface Modification for Improving the Formability of SPA Laminated Composite" , Journal of Advances in Engineering Software, Vol. 30, pp. 451-458, 1999.

1998 Papers (SCIE)

Babetty, Z., Sümer, A., Altıntaş, S., "Knot Properties of Alternating Sliding Knots with Different Patterns in Comparison to Alternating and Simple Sliding Knots", Journal of American College of Surgeons, 186, No. 5, 1998.
Babetty, Z., Sümer, A., Ergüney, S., Göksel, S., Altıntaş, S. "Changes in Knot-Holding Capacity of Sliding Knots in vivo and Tissue Reaction", Archieves of Surgery, 133, 727 – 734, 1998.
Bayraktar, E., Altıntaş, S., "Some Problems in Steel Sheet Forming Processes", Journal of Materials Processing Technology, Vol. , No. 80., pp. 83-89, 1998.
Sönmez, F.Ö. and H.T. Hahn, “Thermomechanical Analysis of the Laminated Object Manufacturing (LOM) Process” Rapid Prototyping Journal, January 1998, 4(1): 26-36.
Türkay, O. S., Sümer, I. T., Tugcu, A.K. and Kıray, B., “Modeling and Experimental Assessment of Suspension Dynamics of an Horizontal-Axis Washing Machine”, ASME Transactions Journal of Vibration and Acoustics, Vol. 120, No., pp.532-543 1998